Install Decorative Glass Set 700Xdgs - Valor G3.5 Installation Manual

Installation

Install Decorative Glass Set 700XDGS

Material required
• Decorative Glass Set, which contains:
• 1 metal tray
• 1 pilot cover
• 1 emberbed cover
• 2 bags of clear fi reglass
• Gloves (recommended to manipulate glass)
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Place emberbed cover over front of burner with
tabs into recess
2. Install the metal tray over the ceramic burner. The
tray stop tabs hook on the rear edge of the ceramic
burner.
Stop tab
3. Place the pilot cover on the metal tray over the pilot
shield. The lip on the top surface goes to the front.
Ceramic burner
4. Carefully fi ll the metal tray with fi reglass, leveling it
with the top of the tray's fl ange.
NOTE: Ensure the pilot area is clear of glass par-
ticles.
IMPORTANT: Use only the fi reglass approved for
your Valor fi replace or the fi reglass brands American
Fireglass™ or fi regear. Use of other fi reglass or crushed
glass can damage your fi replace and void the war-
ranty.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of glass pieces as these could
be ingested by small children. Vacuum
area after installation.
Fuel Beds
21