Install Decorative Glass Set 1400Dgs - Valor 1400IN Installation & Owner's Manual

Install Decorative Glass Set 1400DGS

Material required
• Decorative Glass Set containing:
•
1 metal tray
•
1 pilot shield
•
3 bags of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the metal tray over the ceramic burner.
2. Place the pilot shield on top of the metal tray spanning
over the pilot area cut-out. Note the orientation of the
pilot shield with the lip being at the front.
3. Carefully fi ll the metal tray with fi reglass, leveling it
with the top of the tray's fl ange.
Installation
lip at the front
CHOKING HAZARD! Ensure that the fi replace
area is clear fi reglass particles as these could be
ingested by small children. Vacuum area after
installation.
NOTE: Ensure the pilot area is clear of glass
particles.
WARNING
!
QUALIFIED
INSTALLER
pilot area
57