Install Decorative Glass Set 785Xdgs - Valor LEGEND G4 785XN Installation And Owner's Manual

QUALIFIED
INSTALLER

Install Decorative Glass Set 785XDGS

Material required
• Decorative Glass Set, which contains:
•
1 metal tray
•
1 pilot cover
•
3 bags of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the metal tray over the ceramic burner. The
tray stop tabs hook on the rear edge of the ceramic
burner.
Stop tab
2. Place the pilot cover on the metal tray over the pilot
shield. The lip on the top surface goes to the front.
32
Installation
Ceramic burner
3. Carefully fi ll the metal tray with fi reglass, leveling it
with the top of the tray's fl ange.
NOTE: Ensure the pilot area is clear of glass
particles.
IMPORTANT: Use only the fi reglass approved for
your Valor fi replace or the fi reglass brands Ameri-
can Fireglass™ or fi regear. Use of other fi reglass or
crushed glass can damage your fi replace and void
the warranty.
WARNING
!
CHOKING HAZARD! Ensure that the fi replace
area is clear fi reglass particles as these could be
ingested by small children. Vacuum area after
installation.