Paper And Other Media; Loading Media In Trays 1, 2, 3, And 4; Loading Paper In Trays 1 And 2 - Xerox D95 User Manual

Paper and other media

Loading media in trays 1, 2, 3, and 4

The following information is applicable for Trays 1-4:
Trays 1 and 2
• Trays 1 and 2 are identical
• Only 8.5 x 11 in./A4 media may be loaded into Trays 1 and 2
• Both trays accommodate media weights from 16 lb bond to 80 lb cover (52 gsm to
216 gsm)
• Tray 1 has a capacity of 1,100 sheets
• Tray 2 has a capacity of 1,600 sheets
• Media must be loaded into the trays in the long edge feed (LEF) direction
Trays 3 and 4
• Trays 3 and 4 are size-adjustable
• Both trays accommodate media sizes starting at 5.5 x 7.2 in./140 mm x 182 mm
(A5) to a maximum of 13.0 x 19.2 in./330 mm x 488 mm (SRA3)
• Both trays accommodate media weights from 16 lb bond to 80 lb cover (52 gsm to
216 gsm)
• Each tray has a capacity of 550 sheets
• Media may be loaded in either the long edge feed (LEF)/portrait or short edge feed
(SEF)/landscape direction

Loading paper in trays 1 and 2

Note
A paper jam may occur if a tray is opened while it is being used to feed stock.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
®
Xerox D95/D110/D125 Copier/Printer
User Guide
3
3-1