Print Self-Test Page And Dump Mode - SNBC BTP-P33 User Manual

4.5 Print self-test page and Dump mode

4.5.1 Print self-test page
1) Install the paper roll;
2) Press the FEED button when the battery has power;
3) Press the power button to turn on the power, and the printer will print
the self-test page.
4.5.2 Dump mode
1) Press the FEED button 1s after printing the self-test page, and the
printer will enter Dump mode. After entering Hexadecimal dumping
mode, the printer will print out the data transmitted from the host
computer in hexadecimal and their corresponding ASCII characters.
The sample printed under Hexadecimal dumping mode is as follows:
2) Exiting from Hexadecimal dumping mode in the following ways:
a.Turn off the power, and then restart the printer.
b.Press the FEED button for three times.
- 15 -
BTP-P33 User's Manual