Table of Contents
Advertisement
Pulse Width Modulation (PWM)
Table 6.
PWM Timing
Characteristic
Low Time Granularity
Low Time Range
High Time Granularity
High Time Range
PWM Mode supports the following maskable interrupt source:
Both edges of the PWM Output signal
In Timer Mode, the timeout period can be configured as follows. This assumes a
nominal system clock frequency of 32MHz. The values, in nanoseconds, will differ if the
system clock frequency is changed.
Table 7.
Timer Period
Characteristic
Timeout Period
Granularity
Timeout Period Range
Timer Mode supports the following maskable interrupt source:
Timer expiry
Interrupts are cleared by reading the Timer N End of Interrupt register.
November 2016
Document Number: 333580-002EN
Value (System Clock Cycles)
1
2 to 4294967296 (2^32)
1
2 to 4294967296 (2^32)
Value (System Clock Cycles)
1
0 to 4294967295 (2^32 -1 )
§
Value (Time)
31.25 ns
62.5 ns to 134.22 s
31.25 ns
62.5 ns to 134.22 s
Value (Time)
31.25 ns
0 to 134.22 s
Intel® Quark™ Microcontroller D2000
Platform Design Guide
25
Advertisement
Table of Contents
