7.0
SPI
The Serial I/O implements one SPI controller that supports master mode and slave
mode. Refer to the Datasheet for additional SPI compatibility requirements and
features. Support for SPI Flash devices is a key platform requirement and needed for all
SoC designs.
Figure 19. SPIO
Features include:
One SPI master interface with support for SPI clock frequencies up to 16 MHz
One SPI slave interface with support for SPI clock frequencies up to 3.2 MHz
Support for 4-bit up to 32-bit frame size
Up to 4 Slave Select pins per master interface
FIFO mode support (16B TX and RX FIFOs)
Support for HW DMA with configurable FIFO thresholds
Intel® Quark™ Microcontroller D2000
Platform Design Guide
30
November 2016
Document Number: 333580-002EN
SPI