Features; Figure 22. Rtc Topology; Table 12. Rtc Signals - Intel Quark D2000 Design Manual

Figure 22. RTC Topology

Table 12. RTC Signals

Signal Name
OSC32_IN
OSC32_OUT
8.1

Features

The following is a list of the RTC features:
 Programmable 32-bit binary counter
 Counter increments on successive edges of a Counter Clock from 1 Hz to 32.768
kHz (derived from the 32.768 kHz Crystal Oscillator clock)

Comparator for Interrupt/Wake Event generation based on the programmed Match
Value
 Support for Interrupt/Wake Event generation when only the Counter Clock is
running (Fabric Clock is off)
Intel® Quark™ Microcontroller D2000
Platform Design Guide
34
Direction/Type
I Analog
O Analog
§
Description
Crystal Input: This signal is
connected to the 32.768 kHz
Crystal.
Crystal Output: This signal is
connected to the 32.768 kHz
Crystal.
Document Number: 333580-002EN
Clocking
November 2016