maxon motor EPOS4 Module 50/5 Hardware Reference Manual page 31

3.3.4.7
Figure 3-17
X8
Head A
Pin
Table 3-27
Cross-section
Length
Head A
Head B
Table 3-28
maxon motor control
EPOS4 Positioning Controller
EPOS4 Module/Compact 50/5 Hardware Reference
Analog I/O (X8)
Analog I/O connector X8
Prefab
Head B
Cable
Color Pin
1 white 1
2 brown 2
3 green 3
4 yellow 4
5 grey 5
6 pink 6
7 blue 7
Analog I/O connector X8 – Pin assignment
7 x 0.14 mm
3 m
Plug
Contacts
Wire end sleeves 0.14 mm
Signal Cable 7core
© 2018 maxon motor. Subject to change without prior notice.
Pin Assignment for Connector Boards & Compact Versions
Signal
AnIN1+ Analog input 1, positive signal
AnIN1− Analog input 1, negative signal
AnIN2+ Analog input 2, positive signal
AnIN2− Analog input 2, negative signal
AnOUT1 Analog output 1
AnOUT2 Analog output 2
GND Ground
Signal Cable 7core (520854)
, grey
2
Molex CLIK-Mate, single row, 7 poles (502578-0700)
Molex CLIK-Mate crimp terminals (502579)
2
Document ID: rel8003
Edition: May 2018
Setup
Description
3-31