3 ] Removing The Main Pcb Assy - Brother TD-2020 Service Manual

[ 3 ] Removing the Main PCB ASSY

(1) Turn the machine upside down.
(2) Remove the two tapes A from the main PCB ASSY and the machine.
(3) Disconnect all harnesses connected to main PCB ASSY.
(4) Remove the five taptite bind B M2.6X8 screws to remove the main PCB ASSY
from the machine.
(5) Remove the tape B and tape C from the main PCB ASSY.
Tape A
Tape A
Taptite bind B M2.6X8
Taptite bind B M2.6X8
Tape B
Main PCB ASSY
Tape C
Figure 3.4-5
III - 7