Agilent Technologies Agilent 1260 Infinity System User's Manual page 69

Installing the Agilent Lab Advisor Software
For details of installation procedures for the Agilent Lab Advisor software,
refer to the software documentation on the Lab Advisor DVD.
Agilent Lab Advisor replaces and extends the diagnostic functions that
were formerly available only in the ChemStation software.
Agilent Lab Advisor is a Windows- based application that continuously
monitors instruments in the lab in real time and increases productivity
through automatic notification of maintenance and service needs with the
use of advanced counters. This allows a problem to be fixed before it
impacts results. The software includes an extensive suite of user
information and documentation, a set of calculators and tools to help set
up, calibrate, and maintain your instrument, and tests and diagnostic
routines to verify proper performance. Agilent Lab Advisor also provides
feedback and solutions for any instrument errors that may arise. The
software will work with or without Agilent data systems.
The software monitors:
• LC module status
• Early Maintenance Feedback (to determine the need for upgrade or
In addition, the software:
• Automates useful tests,
• Attempts to identify supported LAN- based instruments that are
• Automatically suggests replacements parts and troubleshooting tasks for
1260 Infinity Binary LC - System User Guide
replacement)
powered on and connected to your PC or lab's network,
some common instrument problems.
System Setup and Installation
Installing Software
4
69