Agilent Technologies Agilent 1260 Infinity System User's Manual page 137

6
Appendix
Setting Up a Method using Edit Entire Method
The access points in the work flow of the method are:
• Pre-Run Command / Macro
• Customized Data Analysis Macro
• Post-Run Command / Macro
Save Method with Data saves a copy of the method in the data file and
names it RUN.M. This is not needed if the ChemStation is operated in the
usual configuration as the software always saves the method in the data
file (all versions since B.02.01). Only if the ChemStation has been
configured such that Unique Sequence Folder Creation is turned off and hence
methods are not routinely copied into the data file, this option will be
relevant.
As this is the final screen in the process, clicking OK will exit from Run
Time Checklist and from the Edit Entire Method process. The method should
now be saved into the master methods directory, by default C:\Chem32\1\
Methods, using File > Save As > Method or Method Menu > Save Method As.
1260 Infinity Binary LC - System User Guide 137