Settings; Monitored Data - ABB Relion SMU615 Technical Manual

1MRS758407 B
3.15.2.4
3.15.2.5
SMU615
Technical Manual

Settings

Table 162: Port mode settings
Parameter Values (Range) Unit
Port 1 Mode Off
On
Port 2 Mode Off
On
Port 3 Mode Off
On

Monitored data

Monitored data is available in six locations.
• Monitoring/Communication/Ethernet/Activity/CH1LIV
• Monitoring/Communication/Ethernet/Activity/CH2LIV
• Monitoring/Communication/Ethernet/Activity/CH3LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK1LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK2LIV
• Monitoring/Communication/Ethernet/Link statuses/LNK3LIV
Step Default Description
On Mode selection for rear port(s). If port is
not used, it can be set to "Off". Port
cannot be set to "Off" when
mode is "HSR" or "PRP" and port is one
of the redundant ports (LAN A or LAN B)
or when port is used for line differential
communication.
On Mode selection for rear port(s). If port is
not used, it can be set to "Off". Port
cannot be set to "Off" when
mode is "HSR" or "PRP" and port is one
of the redundant ports (LAN A or LAN B).
On Mode selection for rear port(s). If port is
not used, it can be set to "Off". Port
cannot be set to "Off" when
mode is "HSR" or "PRP" and port is one
of the redundant ports (LAN A or LAN B).
Section 3
Basic functions
Redundant
Redundant
Redundant
117