ABB Relion SMU615 Technical Manual page 96

Section 3
Basic functions
Table 122: TPSGAPC Non group settings (Basic)
Parameter
Pulse time
90
Functionality
The Minimum second pulse timer function TPSGAPC contains two independent
timers. The function has a settable pulse length (in seconds). The timers are used for
setting the minimum pulse length for example, the signal outputs. Once the input is
activated, the output is set for a specific duration using the Pulse time setting. Both
timers use the same setting parameter.
GUID-8196EE39-3529-46DC-A161-B1C40224559F V1 EN
Figure 60: A = Trip pulse is shorter than Pulse time setting, B = Trip pulse is
longer than Pulse time setting
Signals
Table 120: TPSGAPC Input signals
Name
IN1
IN2
Table 121: TPSGAPC Output signals
Name
OUT1
OUT2
Settings
Values (Range) Unit
0...300 s
Technical revision history
Table 123: TPSGAPC Technical revision history
Technical revision
B
C
Type Default Description
BOOLEAN 0=False Input 1
BOOLEAN 0=False Input 2
Type Description
BOOLEAN Output 1 status
BOOLEAN Output 2 status
Step Default
1 0
Change
Outputs now visible in menu
Internal improvement
1MRS758407 B
Description
Minimum pulse time
Technical Manual
SMU615