Restctr Function Block; Function Block; Settings; Goose Function Blocks - ABB Relion SMU615 Technical Manual

1MRS758407 B
3.10.3
3.10.3.1
3.10.3.2
Table 45: RESTCTR1_ct Non group settings (Basic)
Parameter Values (Range)
Primary current
Secondary current
Amplitude Corr
Table 46: RESTCTR1_ct Non group settings (Advanced)
Parameter Values (Range)
Reverse polarity
3.11
SMU615
Technical Manual

RESTCTR function block

Function block

RESTCTR
GUID-878204B1-5920-4A4F-A73B-3779C062B2B1 V1 EN
Figure 28: Function block

Settings

Unit
1.0...6000.0 A
1=0.2A
2=1A
3=5A
0.9000...1.1000
Unit
0=False
1=True

GOOSE function blocks

GOOSE function blocks are used for connecting incoming GOOSE data to
application. They support BOOLEAN, Dbpos, Enum, FLOAT32, INT8 and INT32
data types.
Common signals
The VALID output indicates the validity of received GOOSE data, which means in
case of valid, that the GOOSE communication is working and received data quality
bits (if configured) indicate good process data. Invalid status is caused either by bad
data quality bits or GOOSE communication failure. See IEC 61850 engineering guide
for details.
The OUT output passes the received GOOSE value for the application. Default value
(0) is used if VALID output indicates invalid status. The IN input is defined in the
GOOSE configuration and can always be seen in SMT sheet.
Step Default
0.1 100.0
2=1A
0.0001 1.0000
Step Default
0=False
Section 3
Basic functions
Description
Primary current
Secondary current
Amplitude correction
Description
Reverse the polarity of the residual CT
63