Minimum Pulse Timer Tpmgapc - ABB Relion SMU615 Technical Manual

1MRS758407 B
3.13.2.3
Table 126: TPMGAPC Non group settings (Basic)
Parameter Values (Range)
Pulse time
SMU615
Technical Manual

Minimum pulse timer TPMGAPC

Function block
GUID-AB26B298-F7FA-428F-B498-6605DB5B0661 V1 EN
Figure 61: Function block
Functionality
The Minimum minute pulse timer function TPMGAPC contains two independent
timers. The function has a settable pulse length (in minutes). The timers are used for
setting the minimum pulse length for example, the signal outputs. Once the input is
activated, the output is set for a specific duration using the Pulse time setting. Both
timers use the same setting parameter.
GUID-8196EE39-3529-46DC-A161-B1C40224559F V1 EN
Figure 62: A = Trip pulse is shorter than Pulse time setting, B = Trip pulse is
longer than Pulse time setting
Signals
Table 124: TPMGAPC Input signals
Name
IN1
IN2
Table 125: TPMGAPC Output signals
Name
OUT1
OUT2
Settings
Unit
0...300 min
Type Default Description
BOOLEAN 0=False Input 1
BOOLEAN 0=False Input 2
Type Description
BOOLEAN Output 1 status
BOOLEAN Output 2 status
Step Default
1 0
Section 3
Basic functions
Description
Minimum pulse time
91