Error Detector Device Commands - Keysight Technologies N4960A User Manual

Remote Operation

6.13 Error Detector Device Commands

184
Commands for controlling an error detector are preceded by :ED. However,
legacy commands preceded by :ED17 or :ED32 are supported but not
recommended. Commands preceded with :ED can be sent to a 17 Gb/s error
detector or 32 Gb/s error detector.
Command
:ED:DATA:AALign:CAALign:DELay
Description
Turn the sampling delay ON or OFF. This determines whether the auto
alignment finds the optimal sampling delay. The default is ON.
Example
:ED:DATA:AAL:CAAL:DEL on
Command
:ED:DATA:AALign:CAALign:DELay?
Description
Return the status of the sampling delay. The returned string is either ON
or OFF.
Example
:ED:DATA:AAL:CAAL:DEL?
ON
Keysight N4960A Serial BERT 17 and 32 Gb/s User Guide