Error Detector Command Summary - Keysight Technologies N4960A User Manual

Remote Operation
6.14.3

Error Detector Command Summary

Command
:ED:DATA:AALign:CAALign:DELay
:ED:DATA:AALign:CAALign:DELay?
:ED:DATA:AALign:CAALign:DSTep?
:ED:DATA:AALign:CAALign:SVOLtage
:ED:DATA:AALign:CAALign:SVOLtage?
:ED:DATA:AALign:CAALign:SVSTep
:ED:DATA:AALign:CAALign:SVSTep?
:ED:DATA:AALign:EXECute
:ED:DATA:AALign:RESults:EHEight?
:ED:DATA:AALign:RESults:EWIDth?
:ED:DATA:AALign:RESults:LAALign?
:ED:DATA:ACCumulation:CLR
:ED:DATA:ACCumulation:RESults:ABER?
:ED:DATA:ACCumulation:RESults:ALL?
:ED:DATA:ACCumulation:RESults:BITS?
:ED:DATA:ACCumulation:RESults:ELAPsed?
:ED:DATA:ACCumulation:RESults:ERONes?
:ED:DATA:ACCumulation:RESults:ERRors?
:ED:DATA:ACCumulation:RESults:ERZeros?
:ED:DATA:ACCumulation:SCONfig
:ED:DATA:ACCumulation:SCONfig?
:ED:DATA:ACCumulation:SCONfig:BITS
:ED:DATA:ACCumulation:SCONfig:BITS?
:ED:DATA:ACCumulation:SCONfig:DUR
:ED:DATA:ACCumulation:SCONfig:DUR?
:ED:DATA:ACCumulation:SCONfig:ERRors
214
The error detector device commands are summarized in
Table 37. Error detector command summary
Parameters / Results
{ON | OFF}
{ON | OFF}
value <unit> ::= 0.005 V to 0.020 V,
resolution = 0.001 V
Momentary command to initiate an auto align
Responds with the eye height
Responds with the eye width
Responds with the date/time of the last auto align
Momentary command to clear the results of an
accumulated BER measurement
Responds with the accumulated BER results
Responds with the current bit count, error count,
accumulated BER, elapsed time, and state
Responds with the accumulated number of bits
Responds with the elapsed time of the measurement
Responds with the accumulated number of 1s
resulting in a bit error
Responds with the accumulated number of errors
Responds with the accumulated number of 0s
resulting in a bit error
{MANual | DURation | BITS | ERRors}
{E8 | E9 | E10 | E11 | E12 | E13 | E14 | E15 | E16 | E17}
value <unit> ::= 1 s to 9999999 s,
resolution = 1 s
value ::= 1 to 99999999,
resolution = 1
Keysight N4960A Serial BERT 17 and 32 Gb/s User Guide
Table 37.