Table of Contents
Advertisement
Remote Operation
174
Command
:PG:DATA:LLEVel:TERMination?
Description
Return the termination value of the data logic level.
Example
:PG:DATA:LLEV:TERM? (@ 0)
1.300V
Queries the termination voltage of the pattern generator connected to
channel 0 (Jitter) only.
Command
:PG:DATA:OUTPut
Description
Turn the pattern generator data outputs ON or OFF. The default is OFF
upon cycling the power, executing a *RST command, or performing an
instrument preset.
Example
:PG:DATA:OUTP on (@ 0,1)
Sets the data outputs to on for the pattern generators connected to
channel 0 (Jitter) and channel 1 (Delay).
Keysight N4960A Serial BERT 17 and 32 Gb/s User Guide
Advertisement
Table of Contents
