Table of Contents
Advertisement
else:
print "** no pattern synchronization, cannot make measurement"
else:
print "** no data input detected, cannot make measurement"
# next section
errchk()
print ""
The program above generates the following output:
connecting to ASRL46
found N4960A-CJ1 serial number 309 (with jitter)
found head: P32 serial number 03.00
found head: E32 serial number 02.00
resetting instrument: done
error queue: 0, "No error"
setting clock: INT 7013000000 Hz
delayed clock outputs: 1.000V ON 0.50UI
divided clock outputs: 1.000V 64 ON
error queue: 0, "No error"
jittered outputs: 1.000V ON
SSC: ON 33000 Hz 5000PPM DOWN SSC ON, 33kHz -0.5%
SSC: OFF
Jitter: PJ: OFF SJ1: OFF SJ2: OFF RJ: OFF
PJ: ON 2400000 Hz 0.320UI
PJ: OFF
SJ1: 200000000 Hz 0.250UI
SJ2: 150000000 Hz 0.150UI
RJ: ON 0.050UI-rms
Jitter: PJ: OFF SJ1: OFF SJ2: OFF RJ: OFF
error queue: 0, "No error"
P32 : 14026000000 bps 0.500V ON PRBS2^9-1 NONI error inject: OFF
error queue: 0, "No error"
E32 : 14026000000 bps 0/1 thr: 0.000V data delay: +0.00UI PRBS2^9-1 NONI
input data: OK
auto-align: Threshold: ON Data delay ON executing.. please wait.. ..done
Auto-align result: 0/1 Threshold = 0.340V , Data delay = 0.840UI
Eye height = 0.340V , Eye width = 0.840UI
sync: SYNC
sync: SYNC
measuring BER
Accumulation status is IDLE
Accumulation status is IDLE
Keysight N4960A Serial BERT 17 and 32 Gb/s User Guide
Remote Operation
225
Advertisement
Table of Contents
