Table of Contents
Advertisement
3.22 Verifying Operation
3.22.1
Initial Hardware Setup – Controller and Pattern Generator
Keysight N4960A Serial BERT 17 and 32 Gb/s User Guide
The following procedures will familiarize you with the features of the
N4960A Serial BERT 17 and 32 Gb/s and provide a quick check of
system operation. The procedures all assume starting from a power up
preset state. In all cases where the preset value of the setting parameter
can be used, no steps are included to set the value.
1. Connect the equipment as shown in
2. Tighten cables to 8 lbf-in (90 N-cm).
Figure 40. Setup for checking jitter
Figure
40.
Operation
85
Advertisement
Table of Contents
