Description Of Menu 7 Functions - Ikegami HLM-1705WR Operation Manual

4-9 Description of MENU 7 Functions

Setting the channel of embedded audio outputs
Set any of the following pairs of channels of
embedded audio to be outputted to the front
speaker.
CH1/2 The output comes out of the paired
CH1 and CH2 channels.
CH3/4 The output comes out of the paired
CH3 and CH4 channels.
CH5/6 The output comes out of the paired
CH5 and CH6 channels.
CH7/8 The output comes out of the paired
CH7 and CH8 channels.
DOWNMIX The output comes out of downmix
5.1ch surround audio.
This function can be assigned with the F1 to
F4 switch on the front panel.
Default setting is CH1/2.
Setting the speaker output signals
Set the signals to be outputted to the speaker
and the rear audio monitor output.
AUTO embedded audios in the SDI
input mode, and analog in
the VBS input modes
EMBEDDED fixed at embedded audios
ANALOG fixed at analog audio
Default setting is AUTO.
Setting the audio level meter display ON/OFF
Used to turn on and off the audio level meter
display.
Default setting is OFF.
Setting the paired channels of embedded audio outputs
Setting the audio output signals
Setting the audio level meter display ON/OFF
Setting the audio level meter display mode
Setting the audio level meter display channel
Setting the audio level meter display brightness
Setting the audio level meter display peak hold
Standard level setting (-18/-20dBFS)
Setting the 5.1 channel surround downmix
Setting the downmix formats (ARIB/ISO IEC)
Setting the Ls/Rs level (-3dB/-6dB/-9dB/OFF)
Setting the embedded audio channel assignment of speaker (Lm)
Setting the embedded audio channel assignment of speaker (Rm)
Setting the embedded audio channel assignment of speaker (C)
Setting the embedded audio channel assignment of speaker (Ls)
Setting the embedded audio channel assignment of speaker (Rs)
Setting the mode display of audio level meter
Set the display mode of the audio level meter.
The number in parentheses shows the order of
display channel.
MODES 5 to 8 are obtained by doubling the
width of MODE 1 to 4.
MODE1 (1357-2468)
MODE2 (1234-5678)
MODE3 (1357-8642)
MODE4 (12-34)
MODE4 (1234-5678)
* The display of MODE 4 varies depending on
the number of channels for the section
- - 26
During the display mode
1-2ch and 1-4ch settings.
During the display mode
1-8ch settings.
.