Table of Contents
Advertisement
Display of preset data list
Display a list of the settings of file data.
To change files, use the
SELECT FILE setting.
Copying of file data
(a) Select the copy source file (D65, D93, FILEx [x: 1
to 8]) using the
/
switch and press the ENT
switch.
(b) Select the copy destination file (FILEx [x: 1 to 8],
FILE1 - FILE8) using the
* When FILE1 - FILE8 are selected, data is
copied to FILE1 through FILE8.
(c)When the ENT switch is pressed, the copy
confirmation message appears. To copy, press
the ENT switch again. If not, press the ESC
switch.
Setting of file change operation at the time of
channel change
Set the association of channel change with file
change.
AUTO:
Files are memorized for each chan-
nel: When a channel is changed to
another, an automatically stored fil-
lies picked up.
MANUAL: Just one file preset for all channels
is fixed.
Default setting is AUTO.
and
switches at the
(a) Selection of copy
source file
(b) Selection of copy
destination file
/
switch.
- 54 -
Setting of data protection password
A password is set to prevent modifications of the
preset data and the initialization.
(a) Display of currently set lock mode
The currently set lock mode is displayed.
UNLOCK
The lock is released and all data
can be changed.
DATA LOCK
Preset data change is locked,
although file change
impossible.
ALL LOCK
Preset data change and file
change are impossible.
(b) Password menu
Select characters from this list using the
and
switches and press the ENT switch to
set the password.
(c) Password entry
When setting the lock mode to ALL LOCK or
DATA LOCK or when releasing the lock
mode(UNLOCK), select characters from the menu
in
and enter a four-digit password here.
* If you forget the registered password, contact
Ikegami's service office. They have a pass-
word for releasing the lock.
(d) Setting of LOCK mode
When the ENT switch is pressed after the pass-
word has been entered, the LOCK mode blinks.
Execute the setting by pressing the ENT key. To
return to the previous state, press the ESC
switch.
(a) Display of currently
set lock mode
(b) Password menu
(c) Password entry
(d) Setting of
lock mode
,
,
Advertisement
Table of Contents
