Description Of Menu-Input Functions - Ikegami HLM-960WR Operation Manual

4-2 Description of MENU-INPUT Functions

INPUT <INPUT>
VIDEO VIDEO SOURCE
AUDIO SOURCE SELECT
TC/WFM/VSC SDI CH LOCK
MARKER
HDMI(DVI)FORMAT
CAPTURE RGB RANGE
UTILITY PinP
FUNC.SW MODE
P.REMOTE SUB DISPLAY
UMD/IMD TIMING MODE
USB MEMORY SDI CH-C/D MODE
C.CAPTION
NETWORK
RESET
INFO
EXIT TEST PATTERN
MIX TEST SIGNAL
RETURN
Setting the VIDEO SOURCE
Set the input signals to be displayed from "SDI
CH-A SDI CH-B SDI CH-C SDI CH-D HDMI
VBS TEST".
The input signals that have been set to "DISABLE"
as shown above are not displayed.
"SDI CH-C SDI CH-D" is displayed only when it is
set to to be an input in the menu.
Default setting is SDI CH-A.
Setting the SOURCE SELECT
If you set input signals using the S-INPUT switch
and RE, set the display to " DISABLE" so that
only required inputs can be quickly set.
ENABLE Enable
DISABLE Disable
<SORCE SELECT>
SDI CH-A ENABLE
SDI CH-B ENABLE
SDI CH-C ENABLE
SDI CH-D
ENABLE
HDMI ENABLE
VBS ENABLE
RETURN
<SORCE SELECT>
SDI CH-A ENABLE
SDI CH-B
ENABLE
SDI CH-C × DISABLE
SDI CH-D × DISABLE
HDMI × DISABLE
VBS × DISABLE
RETURN
Default setting is all inputs
ON/OFF setting of SDI CH Lock
Set to "ON" to prevent the A/B/C/D input channel
switching for SDI signals and fix the input channel.
It is effective when the MONITOR OUT terminal is
used and the channel needs to be fixed. It prevents
switching the channel by mistake.
SDI CH-A
EXECUTE
OFF
RGB
AUTO
OFF
Side by Side
SDI CH-B
SYNCRONOUS
OUT AB
CH-A
CH-B
CH-C
CH-D
GRAY SCALE
EXECUTE
Execute item to
Display SOURCE
SELECT
To enable only SDI-A
/B, set other inputs
to × DISABLE.
ENABLE.
- -
13
HLM-960WR / 1760WR / 2460W
<SORCE SELECT>
SDI CH-A
SDI CH-B
SDI CH-C
SDI CH-D
HDMI
VBS
RETURN
* Before setting to "ON", select the SDI channel
needed to be fixed.
Default setting is OFF.
Setting RGB/YPbPr for HDMI(DVI) input
The RGB/YPbPr setting is automatically recognized
and set by HDMI signals from the packet infor-
mation of the info frame regardless of this setting.
There is no RGB/YPbPr information in the packet
information if the signals are converted from DVI to
HDMI signals. So, set RGB/YPbPr here.
Default setting is RGB.
Setting the HDMI RGB range
Set the black level and white level values in the RGB
format of the HDMI signal.
FULL 0 (black level) - 255 (white level)
LIMIT 16 (black level) - 235 (white level
AUTO Set according to info frame packet
information.
Default setting is AUTO.
Setting the PinP ON/OFF
This function simultaneously displays two input
signals on two screens and turns on/off the display
of PinP.
It can be assigned to a FUNCTION key.
* It supports identical format signals only.
Default setting is OFF.
Setting the PinP mode
Set the PinP mode.
The main screen and sub screen can be displayed in
the identical format only.
Main screen: Inputs set in the menu (VIDEO
SOURCE)
Sub screen: Inputs set in the menu (SUB DISPLAY)
* The TEST signals do not work.
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE