Table of Contents
Advertisement
2 Names of parts and their Functions
2-1 Front Controller Parts
POWER switch
This switch is used to turn ON/OFF the monitor.
* This switch will not turn ON/OFF the AC power
supply for the monitor.
* It takes several seconds for an image to come up
after power-on.
POWER LED
This LED is lit up in green when the power supply
for the monitor is ON.
MENU switch
This switch is pressed to display the menu screen
and to change the menu screen.
* This switch is disabled when the menu is dis-
played.
PRESET switch
This switch is pressed to display the preset menu.
* This switch is ineffective when the menu is dis-
played.
ENT switch
Press this switch to execute menu operations.
ESC switch
This switch is pressed to escape from menu oper-
ation.
(UP)/
(DOWN)/
(LEFT)/
Use this switch to change menu items or the set-
ting of each item when a menu or preset menu is
displayed.
With the menu off and the marker on, the image
pattern can be preset with the
and the safety marker area with the
switches in the range of 80-99%
INPUT SELECT switch
Use the
sources.
CH-B switch
Use this switch to change channels in the SDI or
VBS input mode.
TEST switch
Press this switch to display internal test signals.
The switching between the following seven types
of TESTS signals is done each time this switch is
pressed.
0% 100%
(RIGHT) switch
and
switches
and
- 4 -
and
switches to change input
100% 102% 104% 106% 108% 109%
+ 2%
0%
- 2%
+ 2%
- 2%
100% Window
- 6.8% - 6% - 4% - 2%
0%
100 109%
+ 2%
100%
- 2%
% Gary
Advertisement
Table of Contents
