Description Of Menu 3 Functions - Ikegami HLM-1705WR Operation Manual

4-5 Description of MENU 3 Functions

Setting the serial remote control ID number
Used to set the ID number (01 to 99) of the monitor.
The ID number is assigned to each monitor in
order to perform remote operation with the in-
frared remote controller (RCT-20A/30A) and seri-
al remote controller (SRC-400).
Default setting is 01.
Setting the ASPECT ratio to Automatic or Manual
Used to select the automatic setting of a preset
aspect ratio or the fixed setting for all reception
channels, when selecting any reception channel.
AUTO : displayed with the set aspect ratio
for each channel
MANUAL : displayed with the same aspect
ratio for all channels
Default setting is AUTO.
* When switching the ASPECT in the parallel re-
mote mode, set the ASPECT ratio to "MANUAL".
Setting the CONT volume function assignment
The "CONT" volume at the front can be operated
for the purpose of backlight adjustment.
CONT : Operates for the purpose of CONTRAST
adjustment
BL : Operates for the purpose of backlight ad-
justment
This setting is reflected on the PRESET
value.
Default setting is CONT.
Setting the monitor ID code for remote control
Setting the automatic/manual aspect ratio change as per reception channel
Setting the assignment of CONT manual control
Setting the tally lamp display format
Setting the same-size (dot-by-dot) display ON/OFF
Setting the SDI channel lock ON/OFF
Setting the format display ON/OFF/TIMER at signal switching
Executing the 2X/4X zoom function
Executing the MIX TEST SIGNAL function
Setting the OSD backlight
Setting the tally lamp indication
Set any of the following display modes of the tally
lamps located at the top of the front of the moni-
tor.
R/G R is on the left side and G on the right side,
when facing the screen.
[R-TALLY ON] [G-TALLY ON]
G/R G is on the left side and R on the right side,
when facing the screen.
[G-TALLY ON] [R-TALLY ON]
R+G The entire tally is displayed.
The lamp is displayed in amber when both the
R-TALLY and G-TALLY are set at ON. Both R-
and G-TALLY at ON.
R/G ALL Displays the entire TALLY only when
it is solely set to ON.
If both R-TALLY and G-TALLY are set to ON,
they will be displayed on the left and right sides.
- - 18
R-TALLY ON]
[G-TALLY ON]
[Both R and G-TALLY at ON]
R-TALLY ON]
[G-TALLY ON]
[Both R and G-TALLY at ON]