Osd Menu Description; Menu Selection - Ikegami LCM-1001 Instruction Manual

OSD MENU DESCRIPTION

MENU SELECTION

1. Press the MENU button to access the Main menu.
2. Use the and
3. Press the OK or
4. Use the and
5. Use the ◀ and
NOTE : If you don't connect RGB port, RGB SETUP menu is not select.
■ A. INPUT Select
■ B. PICTURE MENU
arrow buttons to highlight a selection.
button to select an item.
arrow buttons to highlight a selection.
arrow buttons to adjust the setting on a selected item.
Inputs can be set to VIDEO1, VIDEO2, S-VIDEO and RGB mode.
1. Press the SOURCE button and then ▲/▼ button to move the source.
2. Press the ▶ button to select the source.
3. Press the MENU/EXIT button to exit the INPUT menu.
- 10 -