Contents Getting Started Setting Caution Load System Default Product features Bklight Dimming Monitor View Misc Initial Setup Basic Information Advanced Input Output Connections Timecode Source Alias Connecting to BNC Signal Device SDI input signal Format System Info SDI output signal Format H Flip Connecting to HDMI Signal Device Test Pattern...
Caution Caution It is highly recommended to read and understand the cautions listed below thoroughly before you start using the product. And if you are unclear with any parts of the cautions or have questions, please contact us. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 4
Caution (cont'd) Explanation of Safety Related Symbols Manual contents are subject to change without notice...
Product Features Product Features Integrated Converter Integrated active SDI-HDMI and HDMI-SDI converter allows the transparent conversion of HD to HDMI signal or conversion of HDMI back to HD format Multi-Format Signal ViewZ monitors are compatible with various sources including - HDMI (compatible with DVI) - SDI signals: 3G(425A/B), HD, SD - CVBS(composite) and YPbPr(component) 3G-SDI: 3Gb/sec 4:4:4 HD...
Monitor View Exterior Information -185 monitor 443 x 308 (mm) Stand 443 x 318 (mm) Front Rear RS-485 IN RS-485 OUT V mount DC 12V Power in XLR Power in...
Initial Setup First Steps When the monitor is powered on and connected to your source, Selecting Input - To select your source, please press SOURCE button - Turn the main jog to make your selection, and click the jog to select - Factory default is SDI.
Basic Information Display information Settings you have entered are displayed on the screen with graphs and texts. Audio Level Center Maker Tally Display Timecode Display Audio Level meter [ Left ] meter [ Right ] CH-1 CH-2 CH-3 CH-4 CH-5 CH-6 CH-7 CH-8...
VIDEO Color Temp Main Video Color model - Select your preferred color temperature settings [ User, 9300K, 7500K, 6500K ] RED gain - adjusts R, G, B Gain GREEN gain - selectable level between [ 0min ~ 100max ] BLUE gain RED bias - adjusts R, G, B Bias or Offset GREEN bias...
Aspect Scan Main Aspect Scan - This product supports various scan modes [ Zreoscan, Underscan, Overscan ] Zeroscan Underscan Overscan Zooms in/out of the image without Zooms in/out of the image without Zooms in/out of the image to 96% changing the aspect ratio. changing the aspect ratio.
A/V Scope Scope Position Main A/V Scope Scope Position - Used to change the position of scopes [ Right/Bottom, Right/Top, Left/Bottom, Left Top ] Waveform Enable Main A/V Scope Waveform Enable - Used to turn on waveform on the screen [ On, Off ] Waveform Source Main...
Setting Main Setting - Used to change options in on-screen display Language English OSD Blend used to change the transparency level of OSD [ 0 (opaque) ~ 10 (transparent) ] OSD Position used to change the position of OSD [ Left/Top, Center/Top, Right/Top, Left/Middle, Center/Middle, Right/Middle, Left/Bottom, Center/Bottom, Right/Bottom ] Load System Default Main...
Advanced Input Output Main Advanced Input Output - Used to control input and output signal including embedded converter HDMI Output Source select output signal [ Disable, SDI, Display, HDMI/ADC ] Color Format select color space [ RGB, 4:2:2, 4:4:4 ] RGB Range Select color range of RGB color format [ 0-255, 16-235 ] YCbCr Range...
Advanced (cont'd) System Info Main Advanced System Info - Used to control all additional updates Firmware Version displays current firmware version FPGA Version displays current FPGA version H Flip Main Advanced H Flip - Used to reverse the display image horizontally [ On, Off ] *remark: OSD also flips which gives difficulty to read OSD menu Test Pattern...
Specification Specifications Product Size 18.5 inch Resolution 1366 X 768 (16:9) Back light Type Color Depth 16.7M (8 Bit) Lcd spec viewing Angle 178°(H) / 178°(V) (Typ.) Luminance (Max.) 250 cd/m² Contrast Ratio 1000 : 1 Display Area Monitor Dim 443 x 308 (mm) Case features Stand Dim...