4-13 Description of MENU 10 Functions
Setting the VBS input
The settings for the VBS signal are set here.
Setting the decoder Y/C separation
For the Y/C separation of VBS (composite) signals,
set any of the following three types of formats.
COMB : comb filter
TRAP : trap filter
This function can be assigned with the F1 to F4
switch on the front panel.
Default setting is 2DYCS.
Setting the VBS input
Setting the decoder Y/C separation
Setting the NTSC setup level
Setting the NTSC setup level
Used to set the setup level at the time of NTSC
signal input. When the black level of the signal
has 7.5% setup, it is set to "7.5%".
Default setting is 0%.
Used to adjust if horizontal stripes appear or the
characters look blurry onscreen.
- -
37