Table of Contents
Advertisement
4-3．Description of MENU 1 Functions
＊Note the following description on the menu.
・The vertical frequency "/60" includes both 60 Hz and 59.94 Hz (60/1.001).
・The vertical frequency "/48" includes both 24 psF and 23.98 psF (24/1.001) in SF mode.
・The vertical frequency "/24" includes both 24 Hz and 23.98 Hz (24/1.001).
ＭＥＮＵ１（ＦＯＲＭＡＴ）：１０８０ｉ
１．ＶＢＳ ＦＯＲＭＡＴ
２．→Ｙ／Ｃ ＳＥＰ．
３．→ＮＴＳＣ ＳＥＴＵＰ ＬＶＬ
４．ＤＶＩ ＦＯＲＭＡＴ
５．→ＹＰｂＰｒ／ＲＧＢ
６．ＣＯＭＰ． ＦＯＲＭＡＴ
７．→ＩＮＰＵＴ ＳＥＬＥＣＴ
８．→ＹＰｂＰｒ
９．→１０３５／１０８０ｉ
10．→４８０ｉ ＳＥＴＵＰ ＬＶＬ
11．ＳＹＮＣ
ＳＥＴ→ ＥＸＩＴ→
ＥＮＴ
① Format display of selected signal
・ Shows the format of the currently selected signal.
② Setting the decoder Y/C separation
・For the Y/C separation of VBS (composite) signals,
set any of the following three types of formats.
: two-dimensional comb filter
・2DYCS
: three-dimensional comb filter
・3DYCS
・TRAP : trap filter
・This function can be assigned with the F1 F2
switch on the front panel.
・Default setting is 2DYCS.
③ Setting the NTSC setup level
・ Used to set the setup level at the time of NTSC
signal input. When the black level of the signal
has 7.5% setup, it is set to "7.5%".
・Default setting is 0%.
④ Setting the YPbPr/RGB signal format of DVI
inputs
・ Used to set the DVI input signal format to YPbPr
or RGB.
・Default setting is YPbPr.
⑤ CM-175: Switching between analog PC and
COMPONENT input signals
：Analog PC input of the CM-175 is
・PC
selected.
：COMPONENT input of the CM-175 is
・VIDEO
selected.
・This function can be assigned with the F1 F2
switchon the front panel.
・Default setting is VIDEO.
① Format display of selected signal
２ＤＹＣＳ
② Setting the decoder Y/C separation
０％
③ Setting the NTSC setup level
ＹＰｂＰｒ
④ Setting the YPbPr/RGB signal format of DVI inputs
ＶＩＤＥＯ
⑤ CM-175: Setting between analog PC snd COMPONENT input signals
ＹＰｂＰｒ
⑥ CM-175: Setting the YPbPr/RGB signal format
１０８０ｉ
⑦ CM-175: Setting the line format with COMP. input
０％
⑧ CM-175: Setting the 480i format setup level
ＩＮＴ
⑨ CM-175: Setting SYNC INT/EXT
（The dashed-line-box items are effective with the CM-175 mounted.）
E S C
⑥ CM-175: Setting the YPbPr/RGB signal format
・ Used to set the component input signal format to
YPbPr or RGB when the optional CM-175 is
mounted.
・Default setting is YPbPr.
※ This item is selectable only when the CM-175
(option) is mounted.
⑦ CM-175: Setting the line format with COMP.
inputs
・ Used to set the component signal to "1035i" only
in the 1035i/60 format input when the optional
CM-175 is mounted.
・Default setting is 1080i/60.
※ This item is selectable only when the CM-175
(option) is mounted.
⑧ CM-175: Setting the 480i format setup level
・ Used to set the component signal setup level in
the 480i/60 format input when the optional
CM-175 is mounted. When the black level of the
signal has 7.5% setup, it is set to "7.5%".
・Default setting is 0%.
※ This item is selectable only when the CM-175
(option) is mounted.
⑨ CM-175: Setting SYNC INT/EXT
・ With the YPbPr/RGB signal input, set the use of a
sync signal that is separated from the Y or G on
SYNC image signal or the use of a sync signal
that is externally inputted.
・ This function can be assigned with the F1 F2
switch on the front panel
・Default setting is INT.
※ This item is selectable only when the CM-175
(option) is mounted.
- -
15
Advertisement
Table of Contents
