Specifications For Lcd Module; Functions - Ikegami HLM-1705WR Operation Manual

d) Display mode
8 modes
e) Display segment
26 segments (including - )
f) Segment point
- , -60, -54, -48, -44, -40, -38, -36, -34, -32,
-30, -28, -26, -24, -22, -20, -18, -16, -14, -12,
-10, -8, -6, -4, -2, 0dB
g) Display color
Reference level (-18dBFS or -20dBFS) is
select in MENU.
-20dBFS
- ~ -22dB:
-20 ~ -2dB:
0dB:
-18dBFS
- ~ -20dB:
-18 ~ -2dB:
0dB:
h) Peak hold
About 1 sec
* It can be set to "OFF" with the MENU
setting.
i) Release time
About 0.4 sec
(5) Analog audio input
a) Input terminal
3.5 stereo mini jack
b) Input level
0dBV max
(6) Speaker output
a) Output
1W (distortion factor: 1.5%)
b) Input signal source
Analog audio input or embedded audio in-
put can be outputted. A signal to be out-
putted is set on MENU (DOWNMIX, CH1/2,
CH3/4, CH5/6, CH7/8).
(7) Color temperature setting
10 types: D65, D93, and USER setting: 8 types
(FILE 1 to 8)
(8) Gamma setting
2 types: 2.2, 2.4

7-3 Specifications for LCD module

(1) Number of pixels
1920 (H) x 1080 (V) dots
(2) Pixel pitch
0.1905 (H) x 0.1905 (V) dots
Green
Yellow
Red
Green
Yellow
Red
- 60 -
(3) Screen size (display area)
365.76mm(H) 205.74mm(V)
(Diagonal 42 cm, 16.5 V type)
(4) Peak brightness (brightness performance for
the single panel)
450 cd/m (typ)
2
(at full white input)
(5) Drive system
a-Si TFT active matrix, line sequential
(non-interlace)
(6) Pixel arrangement
RGB vertical stripe
(7) Response speed
Ton + Toff: 13ms typ. ( Ta = 25°C)
(8) Contrast ratio
1000:1 (typ.)
(9) Number of display colors
1000.7 million colors (10bits)
(10) Viewing angle
Vertical/horizontal: 178° (contrast ratio: 10:1 or
more)

7-4 Functions

(1) Front operation
Switch
POWER ON/OFF CH A/B INPUT(SDI/VBS)
MONO APT MARKER SCREEN F1
F2 F3 F4 MENU
PRESET ENT ESC TEST
Volume
CHROMA, BRIGHTNESS, CONTRAST,
AUDIO
(2) Marker function
a) Center marker
(Set to ON/OFF using MENU settings)
b) Safety marker
Any of the following markers is displayed
according to the image aspect ratio (4:3/16:9).
The numbers in parentheses show the aspect
at the time of marker display.
<Types>
"Safety area marker" + 100% (4:3/16:9)
The "safety area markers" are effective
over the entire screen and can be preset
1% by 1% in the range of 80-99%.