4-3. Description of MENU 1 Functions
* Note the following description on the menu.
The vertical frequency "/60" includes both 60 Hz and 59.94 Hz (60/1.001).
The vertical frequency "/48" includes both 24 psF and 23.98 psF (24/1.001) in SF mode.
The vertical frequency "/24" includes both 24 Hz and 23.98 Hz (24/1.001).
M E NU 1 (FO R MAT ) :10 8 0i
1 . VBS FO R MAT
2 . → Y /C S EP.
3 . → N TSC SET U P L VL
4 . DVI FO R MAT
5 . → Y PbP r /RG B
6 . COM P . F ORM A T
7 . → Y PbP r
8 . → 1 035 / 1 080 i
9 . → 4 80 i S E TUP LV L
1 0 .S Y NC
SET→ E X IT →
ENT
ESC
① Format display of selected signal
Shows the format of the currently selected signal.
② Setting the decoder Y/C separation
For the Y/C separation of VBS (composite) signals,
set any of the following three types of formats.
• 2DYCS: two-dimensional comb filter
• 3DYCS: three-dimensional comb filter
• TRAP : trap filter
This function can be assigned with the F1 F2
switch on the front panel.
• Default setting is 2DYCS.
③ Setting the NTSC setup level
Used to set the setup level at the time of NTSC
signal input. When the black level of the signal
has 7.5% setup, it is set to "7.5%".
• Default setting is 0%.
④ Setting the YPbPr/RGB signal format of DVI inputs
Used to set the DVI input signal format to
YPbPr or RGB.
• Default setting is YPbPr.
⑤ CM-240: Setting the YPbPr/RGB signal format
Used to set the component input signal format to
YPbPr or RGB when the optional CM-240 is
mounted.
• Default setting is YPbPr.
* This item is selectable only when the CM-240
(option) is mounted.
① Format display of selected signal
② Setting the decoder Y/C separation
2D Y CS
③ Setting the NTSC setup level
0%
④ Setting the YPbPr/RGB signal format of DVI inputs
Y P b Pr
⑤ CM-240: Setting the YPbPr/RGB signal format
Y P b Pr
⑥ CM-240: Setting the line format with COMP. inputs
1 0 8 0 i
⑦ CM-240: Setting the 4801i format setup level
0 %
⑧ CM-240: Setting SYNC INT/EXT
IN T
(The dashed-line-boxed items are effective with the CM-240 mounted.)
- 15 -
⑥ CM-240: Setting the line format with COMP. inputs
Used to set the component signal to "1035i" only
in the 1035i/60 format input when the optional
CM-240 is mounted.
• Default setting is 1080i/60.
* This item is selectable only when the CM-240
(option) is mounted.
⑦ CM-240: Setting the 480i format setup level
Used to set the component signal setup level in
the 480i/60 format input when the optional CM-
240 is mounted. When the black level of the
signal has 7.5% setup, it is set to "7.5%".
• Default setting is 0%.
* This item is selectable only when the CM-240
(option) is mounted.
⑧ CM-240: Setting SYNC INT/EXT
With the YPbPr/RGB signal input, set the use of
a sync signal that is separated from the Y or G
on SYNC image signal or the use of a sync signal
that is externally inputted.
This function can be assigned with the F1 F2
switch on the front panel.
• Default setting is INT.
* This item is selectable only when the CM-240
(option) is mounted.