Table of Contents
Advertisement
(7) User marker display function
Up to 100 types (10 scenes x 10 types) of user
markers can be plotted. Also up to 10 types of
lines or BOX markers per 1 scene can be plotted
to a given positions and sizes on a pixel basis, and
10 scenes can be set.
The line and box drawing settings can be eas-
ily made with not just the switch but also the
USB mouse. Resulting complicated data may also
be saved on a USB memory so that the data can
be copied to another monitor or stored in a PC.
This function is optimum for positioning in ed-
iting the layout and its display for various types
of information such as teleshopping.
* It is patented.
(8) Shadow function
The shadow function is to shade the area other
than a 4:3 (16:9 mode), 13:9, 14:9, 15:9 or 16:9 (4:3
mode) marker area on images. The shadow con-
trast can be set at 0%, 20%, 40% or 60% on the
MENU. The use of this function allows you to
instantly visualize the image area when convert-
ing images with an aspect ratio of 16:9 to those
with an aspect ratio of 4:3 or vice versa.
(9) Various built-in test signals
As color bar signal, pluge signal, grayscale
signal with pluge, window signal, 20% gray signal,
-6.8% to 0% & 100% to 109% signals are built in
as a standard inside the monitor, various ad-
justment tasks can be performed by the monitor
itself.
(10) Time code display function
It is possible to display the time code (VITC)
multiplexed into HD SDI signal on the screen.
The display comes in two sizes, large and small,
and its brightness in three levels.
(11) Waveform monitor/Vector scope display func-
tions
Waveform monitor of brightness signal can be
displayed. The display comes in two sizes,
NORMAL and SMALL, and its brightness in four
levels. The waveform can also be displayed in any
of three selectable positions and in one of two
colors: GREEN and WHITE. The vector scope can
also be readily displayed.
(12)
Display comparison function by using 2
split screens or by switching between 2 full
screens
This is a convenient function to display the still
pictures that were captured in advance and the
videos that are currently being input with
two-screen display on the both sides of screen.
This function is useful to adjust and align the
multiple cameras.
(13) Dot-by-dot display function
All the picture elements of an input signal are
displayed 1:1 according to the pixels of the panel
without scaling the incoming signal (enlarging or
reducing the input signal according to the panel
pixels).
This function is useful in checking transmitted
input signals for pixel defects, camera CCD's
scratches, etc.
Only 1080i/p signal will be displayed at normal
scan status of 1:1.
(14) External memory function
Various data (including the MENU settings,
the PRESET data) can be stored on the USB
memory for data management on the PC.
these data can be copied onto another monitor.
* In case the data is to be copied onto another
monitor, care should be taken as the PRESET
data on individual monitors are different in
their data types.
(15) USB mouse control
By connecting a commercially available USB
mouse to the USB terminal of this monitor, it is
possible to perform various adjustments including
the "MENU setting," "PRESET data setting,"
"Input signal switching," and the "Front switch
setting" through the use of a mouse.
operation of the monitor at a distant position is
possible by using a commercially available wire-
less mouse.
Use of the scroll wheel function of the mouse
has significantly improved the user-friendliness
of the monitor for making adjustment of various
data such as color temperature.
(16) Downmix function
Among the embedded audio 8 channels, 5.1
channel surround audio channel (Lm, Rm, C, Ls,
and Rs) has been selected for the stereophonic
audio function at the downmix mixing ratio spec-
ified by ARIB and ISO/IEC.
You can output the downmixed audio to the
speaker that is built in the monitor.
- 2 -
All
Remote
Advertisement
Table of Contents
