Table of Contents
Advertisement
HQLM-1720WR
4-3 Description of MENU-VIDEO Functions
Setting the chroma gain-up ON/OFF
Set the gain-up ON/OFF for chroma.
When Chroma Gain Up is On the chroma gain
increases by "+9 dB or +12dB".
This function can be assigned to a function switch
on the front panel.
Default setting is OFF.
Setting the gain-up level (9db/12dB)
Sets the Chroma Gain Up level.
Selects the Chroma Gain Up level from "+9dB or
+12dB".
Default setting is 12dB.
Setting the scan mode (NORMAL/NATIVE)
While the input signal is 2K signal, switch the
mode which is converted up to 4K.
NORMAL Scaler indication
Display by interpolating by the filter
NATIVE
Doubler indication
Display
two-by-two in row and line.
Default setting is NORMAL.
Setting the REAL SCAN ON/OFF
In case of ON, if the input signal is 2K signal, the
image is displayed in the middle of the screen
without enlarging or downsizing and without
resizing (with original number of pixels).
* MARKER turns to OFF.
Default setting is OFF.
Setting the APERTURE ON/OFF
Set the APERTURE ON/OFF.
This function can be assigned to a function switch
on the front panel.
Default setting is OFF.
the
same
pixels
for
Setting the APERTURE LEVEL
Set the APERTURE level in the range from 1 to 63.
Default setting is 16.
Setting the APERTURE frequency
Set the boost frequency of APERTURE.
LOW Boost from around 10MHz
MID1 Boost from around 15MHz
MID2 Boost from around 20MHz
HIGH Boost from around 25MHz
Default setting is HIGH.
Setting the IP conversion mode
It sets the movie detection mode when the interlace
signal is displayed by converting to progressive.
MOTION
: Movie level high
STILL
: Movie level low (lower than still
image)
Default setting is MOTION.
- -
16
Advertisement
Table of Contents
