Data 1 Parallel Remote Pin Function - Ikegami HLM-1705WR Operation Manual

Data 1 Parallel Remote Pin Function

Connector Face View on Rear Panel
<Connector on system side>
D-Sub 15-pin (male) mini-type
* Connector
CD0115PA100: CVILUX-made
* Case
DE-C8-J9-F2-1:
Japan Aviation Electronics Indus-
try-made
The above parts or equivalents are
supplied as standard.
Pin functions by default
Pin No. Function
1 GND
2 CH-B on
3 NC
4 G TALLY on
5 NC
6 CHR UP on
7 MONO on
8 NC
9 NC
10 16:9 on
11 NC
12 MARKER on
13 SHADOW on
14 R TALLY on
15 Multi-SDI on
Additional user-set functions
Pin No. Function
User setting SHADOW0 on
User setting SHADOW20 on
User setting SHADOW40 on
User setting SHADOW60 on
* The functions of pins other than 1 are freely user-settable on MENU.
External Assignment for Function
Connecting remote terminals to this pin enables ON control.
Connect to Pin 1 to select B channel in the Multi-SDI input mode.
* When Pin 2 is OPEN, the A channel will be selected.
No connection
Connect to Pin 1 to set G TALLY to ON.
No connection
Connect to Pin 1 to set CHROMA GAIN UP function to ON.
Connect to Pin 1 to switch the COLOR/MONO setting to MONO.
No connection
No connection
Connect to Pin 1 to change the aspect (4:3/16:9) of SDTV signals to 16:9.
* If the setting is to be controlled simultaneously with channel switching, set [CHANGE
ASPECT] to [MANUAL] in MENU 3-2.
No connection
Connect to Pin 1 to set MARKER to ON.
Connect to Pin 1 to set SHADOW to ON.
* The shadow is displayed in the MENU8-preset level.
Connect to Pin 1 to set Red TALLY to ON.
Connect to Pin 1 to select the Multi-SDI input module.
Use together with Pin 2 to switch between channels A and B.
* When Pins 5, 11, 15 are open, the analog composite will be selected.
External Assignment for Function
Connect to Pin 1 for running with the shadow level 0% (black).
* Priority is given to this pin function if any other shadow setting pin is pressed at
once.
Connect to Pin 1 for running with the shadow level 20%.
Connect to Pin 1 for running with the shadow level 40%.
Connect to Pin 1 for running with the shadow level 60%.
- 67 -