Ikegami HLM-960WR Operation Manual
  1. Manuals
  2. Brands
  3. Ikegami Manuals
  4. Monitor
  5. HLM-960WR
  6. Operation manual

Ikegami HLM-960WR Operation Manual

Full hd multi format lcd color monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

MODEL
HLM-960WR
HLM-1760WR
HLM-2460W
FULL HD MULTI FORMAT
LCD COLOR MONITOR
OPERATION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Ikegami HLM-960WR

Summary of Contents for Ikegami HLM-960WR

  • Page 1 MODEL HLM-960WR HLM-1760WR HLM-2460W FULL HD MULTI FORMAT LCD COLOR MONITOR OPERATION MANUAL...
  • Page 3 2014/35/EU for Low voltage (Safety) 2011/65/EU for RoHS directive Standards : HLM-960WR, HLM-1760WR, HLM-2460W: EN55032 (Class A), EN55103-2-E4, EN60950-1 WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR WATER. Disposal of used Electric and Electronic Equipment...
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS 5) For added protection for this television equipment 1. General during a lightning storm, or when it is left 1) Read all instructions provided. unattended and unused for long periods of time, 2) Save these instructions for future use. unplug it from the wall outlet.
  • Page 5 5) If an image of extremely high brightness is 4) For repair service, contact Ikegami’s authorized displayed on the screen for a long time, the image sales representative or Ikegami service desk may get burned in.
  • Page 6 In voltage range marked on its back. such cases, contact the Ikegami service desk. 4) If cabinet or screen is dirty, wipe with soft cloth. 9) Should this unit fail within one year after delivery,...
  • Page 7 Precautions Upon Use In order to use the monitor safely, read through this manual and pay attention to the following points in particular. 1. Do not use any power supply other than the specified one (AC/DC). 2. Do not give a shock to the monitor. Be very careful to keep the monitor from shocks because glass is used inside the LCD.
  • Page 8 8. Avoid operation at low temperatures. The response speed of the liquid crystal decreases as the temperature decreases. Therefore, it is recommended to use the monitor at room temperature. 9. Caution for condensation. When the monitor is used in conditions where the temperature abruptly changes, the surfaces outside and inside monitor may get condensation.
  • Page 9 The brightness of the backlight may be reduced in order to keep the internal temperature of the motor from rising. If the message "FAN ERROR!" is displayed, contact your dealer or Ikegami service desk. Warranty If the product should fail within one year from the date of delivery in spite of the proper use, the manufacturer will repair the product free of charge.

  • Page 10: Table Of Contents

    HLM-960WR / 1760WR / 2460W CONTENTS IMPORTANT SAFETY INSTRUCTIONS ················ PRECAUTIONS FOR OPERATION ······················ Cautions for Rack-Mount. ··································· Precautions Upon Use ······································· 1. Outline ..............1 6. Mouse menu function ..........60 ............... 1 ....60 1-1. Outline 6-1. Basic procedure of the mouse menu .............

  • Page 11: Outline

    HLM-960WR / 1760WR / 2460W HLM-960WR / 1760WR / 2460W LCD Video Monitor 1 Outline 1-1 Outline automatically recognizes the embedded audio signal that is multiplexed into the SDI signal and These monitor models have either a 9 / 17-inch the HDMI signal.
  • Page 12 HLM-960WR / 1760WR / 2460W This function is optimum for positioning in ed- useful to adjust and align multiple cameras. Since iting the layout and its display for various types up to 100 captured images can be controlled by of information such as teleshopping.
  • Page 13 HLM-960WR / 1760WR / 2460W 10-bit full HD LCD panel. (22) UMD/IMD display with user display *HLM-2460W can accept AC power only. Sets a material name (alphanumeric) with up to 8 characters to individual monitor for each in- put (SDI-A/SDI-B/SDI-C/SDI-D/HDMI/VBS) and...

  • Page 14: Names Of Parts And Their Functions

    HLM-960WR / 1760WR / 2460W 2 Names of parts and their Functions 2-1 Front Control Panel HLM-960WR HLM-1760WR / 2460W * The stereo speeker, which is mounted on HLM-2460W, is not drown in the above illustration. POWER switch PRESET switch This switch is used to turn ON/OFF the monitor.
  • Page 15 HLM-960WR / 1760WR / 2460W <VIDEO SOURCE> <SORCE SELECT> SDI CH-A SDI CH-A ENABLE SDI CH-B SDI CH-B ENABLE SDI CH-C SDI CH-C ENABLE SDI CH-D SDI CH-D ENABLE HDMI HDMI ENABLE ENABLE RETURN TEST EXIT <SORCE SELECT> SDI CH-A...
  • Page 16 HLM-960WR / 1760WR / 2460W b) Long Press MENU-FUNC.SW-FUNCTION-MODE. For presettable items, refer to "4-10. Description If the MENU display is OFF, a long press of the on MENU-FUNC. SW Functions" RE switch displays the MENU. If the MENU is...
  • Page 17 HLM-960WR / 1760WR / 2460W VR ASSIGN setting. Stereo headphones output (stereo mini-jack type) AUDIO control Analog audio signals, embedded audio signals Use this control to adjust the sound volume of and downmix audio signals are fed out of this the front speaker or the headphones.

  • Page 18: Rear Panel (Left)

    HLM-960WR / 1760WR / 2460W 2-2 Rear panel (left) (HLM-2460W has no DC input.) BB-904V BB-904A HLM-960WR HLM-1760WR BB-1750V BB-1750A DC input PRECAUTIONS Insert a DC cable here to supply DC +12V power. When using an external DC power supply, be sure...

  • Page 19: Rear Panel (Video Inputs/Outputs)

    HLM-960WR / 1760WR / 2460W 2-3 Rear panel (video inputs/outputs) SDI A/B signal input Analog audio input Input a 3G/HD-SDI or SD-SDI (4:2:2) signal Feed analog stereo audio signal here. here. The format of input signal is automatically RS-485 connection Monitor control is possible by connecting a serial identified.

  • Page 20: External Control

    HLM-960WR / 1760WR / 2460W 2-4 External control Ikegami SRC-400 SERIAL REMOTE CONTROLLER MONITOR NUMBER CALL...

  • Page 21: Markers

    HLM-960WR / 1760WR / 2460W 3 Markers 3-1 Types of Markers In the 16:9 aspect ratio display mode (HDTV/SDTV) In the 4:3 aspect ratio display mode (SDTV) (1) Safety marker (9) Safety maeker Active screen area Active screen area (4:3)

  • Page 22: Menu Functions

    HLM-960WR / 1760WR / 2460W 4 MENU Functions 4-1 MENU Outline Normal screen Long Long pressing pressing INPUT <INPUT> INPUT <VIDEO> VIDEO VIDEO SOURCE SDI CH-A VIDEO VIDEO SOURCE SDI CH-A AUDIO SOURCE SELECT EXECUTE AUDIO SOURCE SELECT EXECUTE TC/WFM/VSC...

  • Page 23: Description Of Menu-Input Functions

    HLM-960WR / 1760WR / 2460W 4-2 Description of MENU-INPUT Functions INPUT <INPUT> VIDEO VIDEO SOURCE SDI CH-A <SORCE SELECT> AUDIO SOURCE SELECT EXECUTE SDI CH-A ENABLE TC/WFM/VSC SDI CH LOCK SDI CH-B ENABLE MARKER HDMI(DVI)FORMAT SDI CH-C ENABLE CAPTURE RGB RANGE...
  • Page 24 HLM-960WR / 1760WR / 2460W * If the main screen and sub screen are connected to Wipe(V) (The ratio is displayed at the top of the screen HDMI, the video of the sub screen will not be dis- played Side by Side Default setting is Side by Side.
  • Page 25 HLM-960WR / 1760WR / 2460W IN / OUT B * Only SDI signals are supported. SDI CH-C input Default setting is OFF. SDI CH-D CH-B output IN / OUT C SDI CH-C input SDI CH-D CH-C output IN / OUT ABC...

  • Page 26: Description Of Menu-Video Functions

    HLM-960WR / 1760WR / 2460W 4-3 Description of MENU-VIDEO Functions INPUT <VIDEO> VIDEO CHROMA GAIN UP AUDIO GAIN UP SELECT 12dB TC/WFM/VSC SCAN MODE NORMAL MARKER REAL SCAN CAPTURE ASPECT MODE 16:9 UTILITY ASPECT REFERENCE INPUT FUNC.SW PC ASPECT NORMAL P.REMOTE...
  • Page 27 HLM-960WR / 1760WR / 2460W Setting the ASPECT REFERENCE Vertical screen position adjustment Used to select automatic setting of a preset aspect Adjust the vertical screen position of the input ratio or a fixed setting for all input channels, signal in the range of -20 to +20.
  • Page 28 HLM-960WR / 1760WR / 2460W Executing the 2x/4x zoom function This is a function used to enlarge the image 2x or You can check for any defects in the camera image, as well as, fine details in the picture. * Supported formats are only 720p, 1080i, and 1080p.

  • Page 29: Description Of Menu-Audio Functions

    HLM-960WR / 1760WR / 2460W 4-4 Description of MENU AUDIO Functions INPUT <AUDIO> VIDEO LINE/SP CH. CH1/2 AUDIO SP INPUT SEL AUTO LEVEL INDICATOR TC/WFM/VSC MARKER MODE 1 ( 1 3 5 7 2 4 6 8 ) CAPTURE CHANNEL...
  • Page 30 HLM-960WR / 1760WR / 2460W MODE5 (1357-2468) Setting the peak hold display of the audio level meter Used to turn on and off the peak hold display. Default setting is ON. Setting the reference level Set the reference level of the audio level meter.
  • Page 31 HLM-960WR / 1760WR / 2460W Setting the embedded audio channel assign- ment of speaker (Rs) Set the channel of embedded audio, which the audio for 5.1ch surround Rs speaker (right side in rear) should be assigned from. Default setting is CH6...

  • Page 32: Description Of Menu-Tc/Wfm/Vsc Functions

    HLM-960WR / 1760WR / 2460W 4-5 Description of MENU-TC/WFM/SC Functions * TC is compatible only with SDI signal (except SD-SDI). * WFM / VSC is supported only for VBS and SDI signals. INPUT <TC/WFM/VSC> VIDEO TC SELECT AUDIO DIMMER MIDDLE...
  • Page 33 HLM-960WR / 1760WR / 2460W switch on the front panel. Setting the VECTOR SCOPE display position Default setting is OFF. Used to set the vector display to any of the RIGHT, CENTER and LEFT positions. When used in common with the WFM, the VEC-...

  • Page 34: Description Of Menu-Marker Functions

    HLM-960WR / 1760WR / 2460W 4-6 Description of MENU-MARKER Functions <SCENE NAME> <SETTING OF USER MARKER> INPUT <MARKER> PAGE1 NO.1 SCENE1 VIDEO MARKER(16:9) SAFETY SCENE NAME SCENE1 NO.2 SCENE2 AUDIO SAFETY AREA SW COL DATA(X NO.3 SCENE3 TC/WFM/VSC ASPECT NO.4...
  • Page 35 HLM-960WR / 1760WR / 2460W ASPECT Displaying the aspect marker Setting the aspect marker shadow level preset in Item Used to set the contrast level of the aspect marker C.CROSS Cross marker. shadow, when displayed. CROSS5 5-split crosshatch pattern. Settings: 0%, 20%, 40% and 60% CROSS10 10-split crosshatch pattern.
  • Page 36 HLM-960WR / 1760WR / 2460W Setting User Markers The name of each scene can be up to 8 characters in Press RE with EXECUTE, and the user mark- length with the following characters: "0-9, A-Z, (), ersetting menu shows up. Now various settings -, □...

  • Page 37: (User Marker)

    HLM-960WR / 1760WR / 2460W 4-7 Description of MENU8-15 (USER MARKER) Functions and Setup <SETTING OF USER MARKER> <SETTING OF USER MARKER> <SETTING OF USER MARKER> PAGE1 PAGE1 PAGE2 SCENE NAME SCENE NAME SCENE1 SCENE1 SW COL DATA(X SW COL...
  • Page 38 HLM-960WR / 1760WR / 2460W Resetting the data Accordingly, in drawing a horizontal line, the Turn the RE counter-clockwise while “DATA(X Y-direction address has a coordinate value with Y)” in is flashing to reset data that has been 3pixel added, as shown below.
  • Page 39 HLM-960WR / 1760WR / 2460W <MARKER> START POINT(X : 0690 , Y : 0540) MARKER(16:9) SAFETY END POINT (X : 0960 , Y : 0540) SHADOW LEVEL CENTER MARKER MARKER LEVEL MARKER COLOR USER MARKER SCENE NAME SCENE1 SETTING EXECUTE RETURN <MARKER>...
  • Page 40 HLM-960WR / 1760WR / 2460W START POINT(X : 0300 , Y : 0250) <MARKER> END POINT (X : 1200 , Y : 0500) MARKER(16:9) SAFETY SHADOW LEVEL CENTER MARKER MARKER LEVEL MARKER COLOR USER MARKER SCENE NAME SCENE1 SETTING EXECUTE RETURN <MARKER>...

  • Page 41: Description Of Menu-Capture Functions

    HLM-960WR / 1760WR / 2460W 4-8 Description of MENU-CAPTURE Functions INPUT <CAPTURE> VIDEO SCR CAPTURE EXECUTE AUDIO AREA FULL FULL CAPTURE EXECUTE TC/WFM/VSC MARKER CHG MANUAL EXECUTE CAPTURE CHG AUTO EXECUTE UTILITY INTERVAL FUNC.SW <TO USB MEMORY> P.REMOTE FILE NO.
  • Page 42 HLM-960WR / 1760WR / 2460W * When the power is turned OFF, the captured Setting up the interval of the automatic switch- image will be lost. If it is desired to save it for ing mode future use, follow item...
  • Page 43 HLM-960WR / 1760WR / 2460W Concerning dates used for stored files Setting the file number of the full capture image This feature is used to specify the file number Since the monitor does not have any built-in clock, (1~100) to be used when storing a full capture “the date,”...
  • Page 44 HLM-960WR / 1760WR / 2460W <CAPTURE> SCR CAPTURE EXECUTE FULL AREA FULL CAPTURE EXECUTE CHG MANUAL EXECUTE CHG AUTO EXECUTE INTERVAL <TO USB MEMORY> FILE NO. SAVE DATA EXECUTE LOAD DATA EXECUTE RETURN <CAPTURE> SCR CAPTURE EXECUTE <CAPTURE> SCR CAPTURE EXECUTE <TO USB MEMORY>...
  • Page 45 HLM-960WR / 1760WR / 2460W <CAPTURE> SCR CAPTURE EXECUTE AREA FULL EXECUTE FULL CAPTURE CHG MANUAL EXECUTE CHG AUTO EXECUTE INTERVAL <TO USB MEMORY> FILE NO. SAVE DATA EXECUTE LOAD DATA EXECUTE RETURN <CAPTURE> <CAPTURE> SCR CAPTURE EXECUTE SCR CAPTURE...

  • Page 46: Description Of Menu-Utility Functions

    HLM-960WR / 1760WR / 2460W 4-9 Description of MENU-UTILITY Functions INPUT <UTILITY> VIDEO CONT VR ASSIGN CONT AUDIO CONTRAST RANGE NORMAL TC/WFM/VSC TALLY MARKER OSD TRANSPARENT CAPTURE FORMAT DISPLAY 3SEC UTILITY SYSTEM LOCK EXECUTE FUNC.SW BATTERY TYPE AC/Ext. P.REMOTE RETURN <LOCK ALL/PRESET>...
  • Page 47 HLM-960WR / 1760WR / 2460W nominal voltage of the battery to be used. Setting the FORMAT DISPLAY Used to set whether the channel and signal format AC/Ext. AC or external stabilized DC power are displayed or not. supply 3SEC ON Three seconds indication DC+14.8V...
  • Page 48 HLM-960WR / 1760WR / 2460W Setting the SYSTEM LOCK Contents of LOCK MODE UNLOCK The lock is released and all data How to set a password can be changed. INPUT INPUT <UTILITY> <UTILITY> PRESET LOCK The PRESET MENU setting of...

  • Page 49: Description Of Menu-Func.sw Functions

    HLM-960WR / 1760WR / 2460W 4-10 Description of MENU-FUNC.SW Functions INPUT <FUNC.SW> VIDEO FUNCTION1 MODE WFM ON AUDIO FUNCTION2 MODE VITC ON TC/WFM/VSC FUNCTION3 MODE MIX TEST MARKER FUNCTION4 MODE VSC ON CAPTURE RETURN UTILITY FUNC.SW P.REMOTE UMD/IMD USB MEMORY C.CAPTION...
  • Page 50 HLM-960WR / 1760WR / 2460W * "DELAY" DELAY corresponds to SDI signal only. During the DELAY, it will be the same magnifi- cation display (REAL SCAN) so that the scaling process is not performed. * "SCREEN" function can be assigned only to HLM - 960WR / WCS models.

  • Page 51: Description Of Menu-P.remote Functions

    HLM-960WR / 1760WR / 2460W 4-11 Description of MENU-P.REMOTE Functions INPUT <P.REMOTE> VIDEO PIN FUNCTION DEFAULT AUDIO P2 : CH-B TC/WFM/VSC P3 : (blank) MARKER P4 : G-TALLY CAPTURE P5 : (blank) UTILITY P6 : CHROMA UP FUNC.SW P7 : MONO P.REMOTE...

  • Page 52: Description Of Menu-Umd/Imd Functions

    HLM-960WR / 1760WR / 2460W 4-12 Description of MENU-UMD/IMD Functions * HLM-2460W does not have the DISPLAY POSITION setting. INPUT <UMD/IMD> VIDEO FUNCTION U.DISP SETTING AUDIO USER DISPLAY >SDI CH-A TC/WFM/VSC USER DISPLAY >SDI CH-B MARKER BRIGHTNESS FULL >SDI CH-C...
  • Page 53 HLM-960WR / 1760WR / 2460W <TALLY lights up when it is set to LED> Setting the Display character position (common LH TALLY RH TALLY setting item) Selects the character position from two types: BOTTOM: Displays on the bottom of screen...
  • Page 54 HLM-960WR / 1760WR / 2460W UMD / IMD Indication Table * HLM-2460W does not have the DISPLAY POSITION setting. TEXT SIZE NORMAL TEXT SIZE NORMAL TEXT POSITION BOTTOM TEXT POSITION DISPLAY POSITION CENTER DISPLAY POSITION CENTER TEXT SIZE SMALL TEXT SIZE...

  • Page 55: Description Of Menu-Usb Memory Functions

    HLM-960WR / 1760WR / 2460W 4-13 Description of MENU-USB MEMORY Functions INPUT <USB MEMORY> VIDEO SETTING DATE&TIME AUDIO DATE(Y/M/D) 17 / 01 / 01 TC/WFM/VSC TIME(H M) 00 00 MARKER CONFIG CAPTURE MENU&SW UTILITY USER MARKER FUNC.SW PRESET P.REMOTE SAVE CONFIG...
  • Page 56 HLM-960WR / 1760WR / 2460W USER MARKER File to save the PRESET menu set- Check this box if you want to download the tings as well as all the D65, D93 and various settings (color, ON/OFF, XY coordi- FILE1 thru -8 data.
  • Page 57 HLM-960WR / 1760WR / 2460W Precautions on downloading Error messages during writing or downloading With a USB memory connected to the monitor, ERROR-1 A file system error is detected do not turn ON/OFF the monitor or disconnect ERROR-2 USB memory is broken.
  • Page 58 HLM-960WR / 1760WR / 2460W How to write from monitor to USB memory <USB MEMORY> SETTING DATE&TIME DATE(Y/M/D) 17 / 01 / 01 TIME(H M) CONFIG MENU&SW USER MARKER PRESET SAVE CONFIG EXECUTE LOAD CONFIG EXECUTE UP DATE MPU FIRMWARE...
  • Page 59 HLM-960WR / 1760WR / 2460W How to download from USB memory to monitor <USB MEMORY> SETTING DATE&TIME DATE(Y/M/D) 17 / 01 / 01 TIME(H M) CONFIG MENU&SW USER MARKER PRESET SAVE CONFIG EXECUTE LOAD CONFIG EXECUTE UP DATE MPU FIRMWARE...
  • Page 60 HLM-960WR / 1760WR / 2460W MPU FIRMWARE Execution of download When updating the MPU firmware, tick the Execute the updating of the item or items selected check box here. by ticking under item It can be updated simultaneously with FPGA.
  • Page 61 HLM-960WR / 1760WR / 2460W How to update MPU from USB memory <USB MEMORY> SETTING DATE&TIME DATE(Y/M/D) 17 / 01 / 01 TIME(H M) CONFIG MENU&SW USER MARKER PRESET SAVE CONFIG EXECUTE LOAD CONFIG EXECUTE UP DATE MPU FIRMWARE FPGA...
  • Page 62 HLM-960WR / 1760WR / 2460W How to update FPGA from USB memory <USB MEMORY> SETTING DATE&TIME DATE(Y/M/D) 17 / 01 / 01 TIME(H M) CONFIG MENU&SW USER MARKER PRESET SAVE CONFIG EXECUTE LOAD CONFIG EXECUTE UP DATE MPU FIRMWARE FPGA...

  • Page 63: Description Of Menu-C.caption Functions

    HLM-960WR / 1760WR / 2460W 4-14 Description of MENU-C.CAPTION Functions INPUT <C.CAPTION> VIDEO CLOSED CAPTION AUDIO HD TYPE SD TYPE 608 / ANC TC/WFM/VSC MARKER SERVICE(708) CAPTURE SERVICE(608) UTILITY C.CAPTION LEVEL HIGH FUNC.SW RETURN P.REMOTE UMD/IMD USB MEMORY C.CAPTION NETWORK...

  • Page 64: Description Of Menu-Network Functions

    HLM-960WR / 1760WR / 2460W 4-15 Description of MENU-NETWORK Functions INPUT <NETWORK> VIDEO REMOTE NO AUDIO IPv4 SETTING EXECUTE TC/WFM/VSC RETURN MARKER IPv4 SETTING CAPTURE ! ! ! ! ! ! ! ! ! ! ! ! IP ADDRESS 192. 168. _ _1. 100...

  • Page 65: Description Of Menu-Reset Functions

    HLM-960WR / 1760WR / 2460W 4-16 Description of MENU-RESET Functions INPUT <RESET> VIDEO LOAD FACTORY AUDIO RESET FILE RETURN TC/WFM/VSC MARKER CAPTURE UTILITY FUNC.SW P.REMOTE UMD/IMD USB MEMORY C.CAPTION NETWORK RESET INFO EXIT Executing the initialization of setup data Selecting the preset files to be initialized Perform this setting to restore the default set- When “PRESET”...

  • Page 66: Description Of Menu-Info Functions

    HLM-960WR / 1760WR / 2460W 4-17 Description of MENU-INFO Functions INPUT <INFO.> VIDEO FORMAT * * * * * * * * * * AUDIO PRODUCT NAME * * * * * * * * * * PRESET FILE TC/WFM/VSC...

  • Page 67: Preset Menu Function

    HLM-960WR / 1760WR / 2460W 5 Preset Menu Function 5-1 List of preset menu To execute the preset menu, press PRESET. * Turn off the menu screen. SELECT FILE FILE REFERENCE INPUT PRESET CHANGE FILE D65 CHROMA BACKLIGHT DIM. BRIGHT CONTRAST 89.0...
  • Page 68 HLM-960WR / 1760WR / 2460W Variable range : -60.0 +60.0 Copying of file data Default setting is 0.0. PRESET COPY FILE CONT CONTRAST FROM Used to set the white level. FILE Variable range : 0.0 120.0 WIDE : 0.0 200.0 EXECUTE R.BKG R.BACKGROUND...

  • Page 69: How To Change Preset Data

    HLM-960WR / 1760WR / 2460W How to change PRESET data SELECT FILE FILE REFERENCE INPUT BACKLIGHT DIM. CHANGE FILE White balance adjustment assist function COPY FILE EXIT PRESET CHANGE FILE D65 CHROMA BRIGHT CONTRAST 89.0 R . GAIN 100.0 R.BKG G.BKG...

  • Page 70: Mouse Menu Function

    HLM-960WR / 1760WR / 2460W 6. Mouse menu function 6-1 Basic procedure of the mouse menu INPUT <INPUT> VIDEO VIDEO SOURCE SDI CH-A AUDIO SOURCE SELECT EXECUTE TC/WFM/VSC SDI CH LOCK MARKER HDMI(DVI)FORMAT CAPTURE RGB RANGE AUTO UTILITY PinP FUNC.SW...

  • Page 71: Basic Procedures On The Menu And Preset Menu Screens

    HLM-960WR / 1760WR / 2460W 6-2 Basic procedures on the MENU and PRESET MENU screens Basic mouse behavior on the MENU screen Basic mouse behavior on the CHANGE PRE- SET screen INPUT <INPUT> VIDEO VIDEO SOURCE SDI CH-A AUDIO SOURCE SELECT...

  • Page 72: Specifications

    HLM-960WR / 1760WR / 2460W 7. Specifications 7-1 General specifications HD-SDI Supply voltage 1035i/60,59.94 1080p/25 a) AC input 1080i/60,59.94 1080p/24,23.98 100 V 120 V 10 % 50 60 Hz 1080i/50 720p/60,59.94 200 V 240 V 10 % 50 60 Hz 1080psF/30,29.97...

  • Page 73: Specifications For Lcd Panel

    HLM-960WR / 1760WR / 2460W d) Audio format To select one of these signals, make the L-PCM setting in MENU (DOWNMIX, CH1/2, e) Audio output CH3/4, CH5/6, CH7/8). By selecting one pair of channels from Speaker output ch1/2, ch3/4, ch5/6,...

  • Page 74: Remote Control

    HLM-960WR / 1760WR / 2460W 60 %. switch. Variable Control User marker function CHROMA, BRIGHTNESS, CONTRAST, AUDIO Function for the user to draw their desired lines and Rotary encoder boxes in the unit of pixels. a) No. of types: 10 scenes x 12 types (1 scene:...

  • Page 75: Mounting

    HLM-960WR / 1760WR / 2460W 9. Options SDI CH-A/C(CH-C Input setting)( ) SDI CH-A/D(CH-D Input setting)( ) 9-1. HLM-960WR/1760WR/2460W (Common) SDI ON/OFF RCT-30A HDMI ON/OFF ( ) “Infrared remote controller” COLOR/MONO switching Just this unit can control most of the monitor 4:3/16:9 switching functions.

  • Page 76: Hlm-1760Wr

    HLM-960WR / 1760WR / 2460W WR-960L (made-to-order) STD-960 "WFM rack mount adaptor" “Stand” Designed specifically for HLM-960WR. Designed specifically for HLM-960WR. Monitor+WFM(Made by Leader Electronics Fixed stand. Corp.: LV5750). STD-960T 4U-size rack mount adaptor. “Tilt-Stand” Designed specifically for HLM-960WR. WR-960L3 (made-to-order) Tilt angle: 10 “WFM rack mount adaptor”...

  • Page 77: Hlm-2460W

    HLM-960WR / 1760WR / 2460W MH-1750 BB-1750V "Hood for 17-inch model" "Battery bracket (V mount type)" Weight: Approximately 0.83kg Weight: Approximately 0.29 kg CC-1760 (made-to-order) BB-1750A "Hard carrying case for 17-inch model" "Battery bracket (anton mount type)" Weight: Approximately 0.37 kg STD-1760 “Fixed stand”...

  • Page 78: External View

    HLM-960WR / 1760WR / 2460W 10 External View [UNIT mm] 10-1. HLM-960WR (1) HLM-960WR (2) HLM-960WR + STD-960 + BB-904V + PP-960 - 68 -...
  • Page 79 HLM-960WR / 1760WR / 2460W (3) HLM-960WR + STD-960T + BB-904A + PP-960 (4) HLM-960WR + DR-960 - 69 -...
  • Page 80 HLM-960WR / 1760WR / 2460W (5) HLM-960WR + HR-960 (6) AT-900 - 70 -...

  • Page 81: Hlm-1760Wr

    HLM-960WR / 1760WR / 2460W 10-2. HLM-1760WR (1) HLM-1760WR (2) HLM-1760WR STD-1760 + BB-1750V + GR-1770 + PP-1760 - 71 -...
  • Page 82 HLM-960WR / 1760WR / 2460W (3) HLM-1760WR + STD-1760T + BB-1750A + GR-1770 + PP-1760 (4) HLM-1760WR + STD-1722M - 72 -...
  • Page 83 HLM-960WR / 1760WR / 2460W (5) HLM-1760WR + RS-1770 (6) HLM-1760WR + RS-1770T - 73 -...

  • Page 84: Hlm-2460W

    HLM-960WR / 1760WR / 2460W 10-3. HLM-2460W (1) HLM-2460W + standard stand - 74 -...
  • Page 85 HLM-960WR / 1760WR / 2460W (2) HLM-2460W + STD-240T + GR-1770 (2) HLM-2460W + RS-2450T - 75 -...

  • Page 86: Data 1 Pc Input Signal Compatible Formats

    HLM-960WR / 1760WR / 2460W Data 1 PC Input Signal Compatible Formats Horizontal frequency Vertical frequency Clock frequency Input signal VGA (640×480) 31.48 59.95 25.18 37.86 72.81 31.50 37.50 75.00 31.50 43.27 85.01 36.00 SVGA (800×600) 35.16 56.25 36.00 37.88 60.32...

  • Page 87: Data 2 Parallel Remote Pin Functions

    HLM-960WR / 1760WR / 2460W Data 2 Parallel Remote Pin Functions Wiring of Remote Connector (by default) Connector Face View on Rear Panel CH-B on G TALLY on CHROMA UP on 6 MONO on <Connector on system side> D-Sub 15-pin (male) mini-type...

  • Page 88: Data 3 Rs-485 Pin Functions

    HLM-960WR / 1760WR / 2460W Additional user-set functions Pin No. Function External Assignment for Function Connect to Pin 1 for running with shadow level 0% (black). User setting SHADOW0 on * Priority is given to this pin function if any other shadow setting pin is pressed at once.

  • Page 89: Data4 Control With Remote Controller

    HLM-960WR / 1760WR / 2460W Data4 Control with Remote Controller Serial remote Wireless remote Control item Remarks SRC-400 RCT-20A/30A ■Switch functions VIDEO SELECT (*1) TEST mode by long press VBS A VBS B VBS is selected SDI A SDI B...
  • Page 90 HLM-960WR / 1760WR / 2460W Notes - 80 -...
  • Page 91 © Jul. 2018 by Product Center of Ikegami Tsushinki Co., Ltd. All right reserved. Reproduction or duplication, without permission of Ikegami Tsushinki Co., Ltd. of edition or contents in whole in part, any manner, is prohibited. Specifications and design are subject to change without notice.
  • Page 92 Ikegami Tsushinki Co., Ltd. 5-6-16, Ikegami, Ohta-ku, Tokyo, 146-8567, Japan Phone: +81-(0)3-5700-4114 Fax: +81-(0)3-5748-2200 URL: https://www.ikegami.co.jp/en/ Contact: https://www.ikegami.co.jp/en/inquiry-general Ikegami Electronics (U.S.A.), Inc. 300 Route 17 South, Mahwah, New Jersey 07430, U.S.A. Phone: +1-201-368-9171 Fax: +1-201-569-1626 URL:https://www.ikegami.com Contact: https://www.ikegami.com/contact-form Ikegami Electronics (Europe) GmbH...

This manual is also suitable for:

Hlm-1760wrHlm-2460w

Table of Contents