Description Of Menu 1 Functions; Description Of Menu 2 Functions - Ikegami HTM-1917R Operation Manual

(3)Description of MENU 1 Functions

* Note the following description on the menu.
The vertical deflection frequency "/60" includes both 60 Hz and 59.94 Hz.
The vertical deflection frequency "/48" shows 24 sF (23.98 sF).
480i/59.94 and 575i/50 are displayed as "525I/60" and "625I/50", respectively.
MENU1 <FORMAT>→ 1080I/60
1.MULTI SID FM
2.RGB/YPbPr FM
3. →1035/1080I
4. →RGB/YPbPr
5.TEST SIG. FM
6.INPUT DISP.
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
① Format display of selected signal
Shows the format of the currently selected signal.
② Format setting of SDI input
When the module (e.g. DKH-501) dedicated to HD-
SDI input is mounted, set the format to any of
1035i/60, 1080i/60 , 720p/60 .
When the HD-SDI input is selected, the monitor
will be set up using the format set here.
The multi-format SDI module, if mounted, triggers
[AUTO] display and the auto detection by FOR-
MAT. The format setting described here is not
necessary.
③ Format setting of RGB/YPbPr input
Set the RGB/YPbPr input format to SDTV or
HDTV.
If set to SDTV, the format 480i/60 or 575i/60 is au-
tomatically detected, and the monitor is set up.
If set to HDTV, the format 1080i(1035i), 720p/60
is automatically detected, and the monitor is set
up.
If the input signal is 1035i/60 or 1080i/60, the for-
mat should be set individually in the following step.

(4)Description of MENU 2 Functions

MENU2 <MODE> VER ： 06.1
1.CENT.MARKER ON
2.MARKER COLOR ■
3.ASPECT 16:9
4.CHANGE ASPE. AUTO
5.SET UP OFF
6.REMOTE NO. 01
7.DEGAUSS TM. 1
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
① Program version display
Displays the software program version.
② Setting of MARKER center cross
Set the marker center cross display to ON/OFF.
< OFF >
Default setting is OFF.
① Format of selected signal
AUTO
② Format setting of SDI input
HDTV ③ Format setting of RGB/YPbPr
1035I/60 ④ Format setting of 1035i/60 and 1080i/60 of RGB/YPbPr input
YPbPr
⑤ Setting of RGB and YPbPr of RGB/YPbPr input
525I/60
⑥ Format setting of internal TEST signal
ON ⑦ Channel format display ON/OFF setting
① Program version display
② Setting of MARKER center cross
③ Setting of MARKER color
④ Setting of ASPECT
⑤ Setting of CHANGE ASPECT
⑥ Setting of SET UP ON/OFF
⑦ Setting of remote ID numbers
⑧ Setting of degauss ON timer
< ON >
Default setting is HDTV.
④Format setting of 1035i/60 and 1080i/60 of
RGB/YPbPr input
Set the scan line number to 1035i or 1080i.
Default setting is 1080i/60.
⑤Setting of RGB and YPbPr of RGB/YPbPr input
Set the RGB/YPbPr input signal to RGB or YPbPr.
Default setting is YPbPr.
⑥ Format setting of internal TEST signal
Set the internal TEST signal of the monitor.
The following five formats are provided as stan-
dard.
480i/59.94 ("525I/60" on the menu),
575i/50 ("625I/50" on the menu),
1035i/60
1080i/60
720p/60
Default setting is 1080i/60.
⑦ Channel format display ON/OFF setting
Set whether to show the input and the signal for-
mat when the channel is switched.
③ Setting of MARKER color
Set the marker color.
Display colors: White, Red, Green, Blue, Yellow,
Magenta, Cyan
Default setting is Green.
④ Setting of ASPECT
Switch between 4:3 and 16:9.
The same operations are performed as the ASPECT
switch located on the front panel and on the wire-
less remote controller.
For details, refer to 4.3(1) ASPECT switch.
32