Table of Contents
Advertisement
Setting the marker display level
Used to set the marker display level.
Settings: 20%, 40%, 60%, 80% and 100%
Default setting is 80%.
Setting the marker display color
Used to set the marker display color.
* The user marker is displayed in the color pre-
set on the user marker menu.
Settings
White, yellow, cyan, green, magenta,
red and blue
Default setting is white.
Setting the user marker display ON/OFF
Used to turn on and off the user marker display.
This function can be assigned with the F1 to F4
switch on the front panel.
Default setting is OFF.
Selecting each scene of user markers and set-
ting the scene names
The user markers can be set for up to 10 scenes;
you can select from displays of SCENE 1 to
SCENE 10.
The name of each scene can be up to 8 char-
acters in length with the following characters:
"0-9, A-Z, (), -,
(blank)".
If you press ENT on the SCENE, the following
SETTING MENU is displayed, and there you
can change the name of each SCENE.
Switches between
SCENES.
The switching of the scenes can be assigned to
the F1 to F4 switches on the previous screen.
Default setting is SCENE1.
Executing the user marker for the drawing set-
ting menu
Press ENT with EXECUTE, and the user
markersetting menu shows up. Now various set-
tings can be made on this menu.
For details, refer to Item 4-11.
- -
31
Advertisement
Table of Contents
