Ikegami HLM-1705WR Operation Manual page 32

Setting the VECTOR SCOPE display ON/OFF
Used to turn on or off the VECTOR SCOPE dis-
play.
This function can be assigned with the F1 to
F4 switch on the front panel.
Default setting is OFF.
Setting the VECTOR SCOPE display brightness
Used to set the VECTOR SCOPE display
brightness in 3 levels: LOW, MID, HIGH and
HIGH(M).
HIGH(M) mode transmits with a picture and
displays it.
Default setting is HIGH.
Setting the VECTOR SCOPE display magnifica-
tion ratio
Used to set the VECTOR SCOPE display mag-
nification in 4 ratios: x1, x2, x4 and x8.
Default setting is x1.
Setting the COLOR BOX scale display
Used to set the VECTOR SCOPE s COLOR BOX
according to the input color bar signal: 75% and
100%.
Default setting is 100%.
Setting the VECTOR SCOPE display position
Used to set the waveform display to any of the
RIGHT, CENTER and LEFT positions.
When used commonly with WFM, the VECTOR
display is located on the left of the WFM one.
Default setting is RIGHT.
RIGHT location
VECTOR
CENTER location
VECTOR
LEFT location
VECTOR
Setting the VECTOR SCOPE display color
Used to set the waveform display color to either of
GREEN and WHITE.
Default setting is WHITE.
- - 22
VECTOR
WFM
VECTOR
WFM
VECTOR
WFM