Table of Contents
Advertisement
HLM-1705WR Full HD Multi-Format LCD Color Monitor
1 Outline
1-1 Outline
This monitor has a 17-inch full HD LCD panel
aiming to reduce the thickness, weight and power
consumption, and is a HDTV/SDTV multi-format
compatible LCD color monitor that is intended to
be used in various spaces such as sub-control
room, edit and monitor shelf, transmission control
desk, and relay mobile.
This monitor is compatible with the functions
and operation of the HTM/TM series CRT moni-
tors, so that it can realize the functions necessary
for a broadcasting service monitor with conven-
tional operation..
1-2 Features
(1) High performance LCD panel
The Full HD (1920 x 1080 dots) 10-bit liquid
crystal panel features high brightness, high con-
trast, wide viewing angle, quick response and
good color reproducibility. Accordingly, realistic
images can be displayed with higher-fidelity gra-
dation but without having to resize the input pix-
els.
(2) Multi-format
The monitor supports various broadcasting
formats.
480i/59.94 (NTSC)
1080p/24, 23.98
575i/50 (PAL-B)
1035i/60, 59.94
1080psF/30
1080i/60, 59.94
1080psF/25
1080i/50
1080psF/24, 23.98
720p/60, 59.94
1080p/60, 59.94
720p/50
1080p/50
720p/30, 29.97
1080p/30, 29.97
720p/24, 23.98 (*1)
1080p/25
720p/25
(*1) SDI input only
(3) Diverse input sources
SDI signal (3G/HD/SD) 2 input, analog compo-
site signal 1 input are included as standard.
(4) Compatibility with embedded audio
It supports the embedded audio as a standard,
and automatically recognizes the embedded audio
signal that is multiplexed to 3G-SDI signal,
HD-SDI signal, and SD-SDI (4:2:2) signal. It also
enables the audio output from the built-in
speaker. (You can select which pair channels to be
output on the MENU.)
The monitor also has a standard embedded
audio level meter display on the screen.
(5) Remote control functions
The monitor can be remote-controlled with the
use of three remote control functions. Depending
on the place of installation and type of operation,
the parallel, serial mode can be used.
Besides the remote control with a conventional
parallel, an input interface of the serial remote
controller SRC-400 (optional) that can be remote
controlled by RS485 is equipped as a standard.
The SRC-400 allows you to remote control up to
96 monitors individually by connecting the moni-
tors with loop-through using RS485. In addition,
since the Ethernet connection between a control-
ler and PC is possible, you can individually con-
trol the monitors that are connected to RS485 via
SRC-400 from the PC screen.
(6) Built-in markers
4:3 (16:9 mode), 13:9, 14:9, 15:9, 16:9 (4:3 mode),
1.85:1 (16:9 mode) and 2.35:1 (16:9 mode) line
markers can be displayed.
The monitor can also get the 1%-stepwise
safety marker displayed in the range of 80-99%
with respect to the line marker area.
The safety markers over the effective screen
can be equally preset 1% by 1% in the range of
80-99%.
The monitor also comes standard abundantly
with five-part split and ten-part split crosshatch
markers useful for location alignment.
- 1 -
Advertisement
Table of Contents
