Change Of Preset Data - Ikegami HLM-1705WR Operation Manual

Change of preset data

Change the data of a file selected in " "
tion of files" on the preceding page.
How to change data
Select "CHANGE DATA" and press the ENT
switch. The following "CHANGE DATA" menu
appears.
Adjustable
HUE
Used to set the hue (only for NTSC signals).
Variable range : -22.5 +22.0
Default setting is 0.0.
CHROMA
Used to set the color density.
Variable range : 0.0 200.0
Default setting is 100.
BRIGHT BRIGHTNESS
Used to set the black level.
Variable range : -60.0 +60.0
Default setting is 0.0.
CONT CONTRAST
Used to set the white level.
Variable range : 0.0 120.0
200.0
R.BKG R.BACKGROUND
Used to set the black balance (red component)
in the dark zone.
Variable range : -25.0 +25.0
Default setting is 0.0.
G.BKG G.BACKGROUND
Used to set the black balance (green compo-
nent)in the dark zone.
Variable range : -25.0 +25.0
Default setting is 0.0.
B.BKG B.BACKGROUND
Used to set the black balance (blue compo-
nent)in the dark zone.
Variable range : -25.0 +25.0
Default setting is 0.0.
Selec-
WIDE : 0.0
- 52 -
R.GAIN
Used to set the white balance (red component)
in the bright zone.
Variable range : 0.0 200.0
Default setting is 100.0.
G.GAIN
Used to set the white balance (green compo-
nent)in the bright zone.
Range : 0.0 200.0
Default setting is 100.0.
B.GAIN
Used to set the white balance (blue compo-
nent)in the bright zone.
Range : 0.0 200.0
Default setting is 100.0.
GAMMA
Sets the gamma setting.
Range : 2.2, 2.4
Default setting is 2.2.
APT LEVEL
Used to set the aperture level.
Variable range : 0 63
Default setting is 16.
APT FREQ.
Used to set the aperture frequency.
LOW Boosting from approx. 10MHz
MID1 Boosting from approx. 15MHz
MID2 Boosting from approx. 20MHz
HIGH Boosting from approx. 25MHz
Default setting is HIGH.