Table of Contents
Advertisement
MENU6
(VIDEO)
MENU7
(AUDIO)
MENU8
(MARKER)
MENU9
(PARALLEL REMOTE)
MENU10
(VBS)
(next page)
1.CHROMA GAIN UP
Setting the chroma gain -up ON/OFF
2. GAIN UP SELECT
Gain-up level (9dB/12dB) setting
3.IP MODE
Setting the IP conversion mode (FIELD/FRAME)
4.SCAN MODE
Scan size (NORMAL/UNDER) setting
5.ASPECT MODE
Aspect (4:3/16:9/ZOOM) setting
6.H OSITION
Adjusting the horizontal screen position
7.V POSITION
Adjusting the vertical screen position
8.CONTRAST RANGE
Setting the contrast range (Normal/Wide)
1.LINE/SP CH.
Setting the paired channels of embedded audio outputs
2.SP INPUT SEL
Setting the audio output signals
3.LEVEL INDICATOR
Setting the audio level meter display ON/OFF
4. MODE
Setting the audio level meter display mode
5. CHANNEL
Setting the audio level meter display channel
6. DIMMER
Setting the audio level meter display brightness
7. PEAK HOLD
Setting the audio level meter display peak hold
8. REF LEVEL
Standard level setting (-18/-20dBFS)
9.DOWNMIX SETTING
Setting the 5.1 channel surround downmix
10. FORMAT
Setting the downmix formats (ARIB/ISO IEC)
11. Ls/Rs LEVEL
Setting the Ls/Rs level (-3dB/-6dB/-9dB/OFF)
Setting the embedded audio channel assignment of speaker
12. INPUT OF Lm
(Lm)
Setting the embedded audio channel assignment of speaker
13. INPUT OF Rm
(Rm)
Setting the embedded audio channel assignment of speaker
14. INPUT OF C
(C)
Setting the embedded audio channel assignment of speaker
15. INPUT OF Ls
(Ls)
Setting the embedded audio channel assignment of speaker
16. INPUT OF Rs
(Rs)
1.MARKER (16:9)
Setting the type of marker displayed at 16:9 aspect ratio
Setting the 16:9 safety marker area (80-99% (1%
2. SAFRTY AREA
increments))
3. ASPECT
Setting the type of aspect marker at 16:9 display
Setting the safety marker (80-99% (1% increments)) in
4. AREA IN ASPECT
aspect marker area
5.MARKER (4:3)
Setting the type of marker displayed at 4:3 aspect ratio
6. SAFETY AREA
Setting the 4:3 safety marker (80-99% (1% increments))
7. ASPECT
Setting the type of aspect marker at 4:3 display
8.ASP MARKER MODE
Setting the aspect marker display mode
9. SHADOW LEVEL
Setting the shadow contrast level with shadow on screen
10.CENTER MARKER
Setting the center cross marker ON/OFF
11.MARKER LEVEL
Setting the marker display level
12.MARKER COLOR
Setting the marker display color
13.USER MARKER
Setting the user marker display ON/OFF
Setting each scene of user markers and setting the scene
14. SCENE NAME
names
15. SETTING
Executing the user marker for the drawing setting menu
1.PIN FUNCTION
Setting the parallel remote pin function
1.VBS FORMAT
Setting the VBS input
2. Y/C SEP.
Setting the decoder Y/C separation
3. NTSC SETUP LVL
Setting the NTSC setup level
- -
10
Advertisement
Table of Contents
