Description Of Menu 13 Functions - Ikegami HLM-1705WR Operation Manual

4-16 Description of MENU 13 Functions

Selecting items to be updated
When updating the monitor by using the data
stored in the USB memory, tick the check box of
the items to be updated.
It is possible to download both items simulta-
neously.
a) MPU FIRMWARE
When updating the MPU firmware, tick the
check box here.
It takes approximately 45 seconds to update the
MPU.
Check the "Ikegami_Monitor" folder located on
the root of the USB memory for existence of the
data for HLM-1705WR.
Ikegami_Monitor
hlm1705mpu_v***.bin
3-digit version number is given right
after the letter "v" at the end of the file
name in the MPU firmware dedicated
to HLM-1705WR.
If, for example, the file name is
"hlm1705mpu_v102.bin," it indicates
that the version of the firmware is
"version1.02."
b) FPGA
When updating FPGA, tick the check box here.
Check the "Ikegami_Monitor" folder located on
the root of the USB memory for existence of the
data for HLM-1705WR.
Storage folder
- 46 -
Update data of MPU
Update data of FPGA
Downloading from USB memory to monitor
Ikegami_Monitor
hlm1705fpga_v**.rpd
2-digit version number is given right
after the letter "v" at the end of the file
name in the FPGA data dedicated for
HLM-1705WR.
For example, the file
name "hlm1705fpga_v02.rpd" indi-
cates "version02".
Execution of download
Execute the updating of the item or items se-
lected by ticking under item
Please refer to "How to update MPU from USB
memory" on page 54 for the method of updating
MPU.
Please refer to "How to update FPGA from USB
memory" on page 55 for the method of updating
FPGA.
When updating both MPU and FPGA simulta-
neously, update FPGA first and, even if an error
should occur then, update MPU next.
Storage folder
.