4-7 Description of MENU 5 Functions
Executing the 2-picture split mode
Used to execute this mode to take in the still
image of an input signal and compare it with
other inputs.
1. With
EXECUTE
press the ENT switch.
2. The display changes as shown below. Press
the ENT switch again to take in the image.
3. Switch the input and compare its image
with the taken-in still image. To take in
another image or to quit the 2-picture split
mode, press the ESC switch.
Still image taken in
Input signal
* The 2-picture split mode is operative with the
same format signals. If different-format sig-
nals are input, the images cannot be properly
displayed.
* With ASPECT set at [16:9], the SDTV signal is
converted to the [4:3].
flashing in magenta,
- -
23
Executing the 2-picture split mode
Setting the 2-picture split mode display area
Setting of 2-picture split display area
Used to set the display area in the 2-picture
split mode.
FULL: Full image displayed
4:3:
Image in the central 4:3 area dis-
played
Default setting is FULL.
* This function is operative with HDTV-format
input signals only.
HDTV < FULL >
HDTV < 4:3 >