Table of Contents
Advertisement
4-8 Description of MENU 6 Functions
Setting the chroma gain-up ON/OFF
Set the gain-up ON/OFF for chroma signals.
At the time of ON, setting in item
gain increases by "+9 dB/+12dB".
This function can be assigned with the F1 to F4
switch on the front panel.
Default setting is OFF.
Setting the gain-up level (9db/12dB)
Sets the Chroma Gain Up level.
Selects the Chroma Gain Up level from
"+9dB/+12dB".
Default setting is +12dB.
Setting the IP conversion mode
The mode for I
P conversion is set in the
1035i/1080i/1080psF/480i/575i formats.
FRAME
The information on the previous and
subsequent fields is used to convert
images to progressive ones. Thanks
to this, diagonal interpolation of
moving images is enabled for opti-
mum setting.
FIELD
The line interpolation in the field is
used to convert images to progres-
sive ones. In this way, the signal
delay can be minimized.
This function can be assigned with the F1 to F4
switch on the front panel.
* If the delay difference between the image and
audio is concerned in the application, you can set
to "FIELD" to operate in a short delay mode,
which enables operation almost without discom-
fort.
* The image quality of the FIELD mode tends to
have some jaggies on the diagonal videos com-
paring to the FRAME interpolation.
Default setting is FIELD.
Setting the chroma gain -up ON/OFF
Gain-up level (9dB/12dB) setting
Setting the IP conversion mode (FIELD/FRAME)
Scan size (NORMAL/UNDER) setting
Aspect (4:3/16:9/ZOOM) setting
Adjusting the horizontal screen position
Adjusting the vertical screen position
Setting the contrast range (Normal/Wide)
Scan size (NORMAL/UNDER) setting
Switches the image display sizes between
the chroma
NORMAL SCAN and UNDER SCAN.
16:9NORMAL SCAN
100% display
4:3NORMAL SCAN
Default setting is NORMAL.
Aspect (4:3/16:9/ZOOM) setting
Use this switch to change image aspect ratios
(4:3/16:9/ZOOM).
Choose between memorizing the settings for
each channel and making the settings for all
channels on MENU2.
* "ZOOM" magnifies the image area in the 4:3
letterbox.
* SDTV format signals (480i/575i) only are effec-
tive.
* In the PC input mode, this function is disabled.
- -
24
16:9UNDER SCAN
95% of NORMAL SCAN
4:3UNDER SCAN
ZOOM
Advertisement
Table of Contents
