Ikegami HLM-1705WR Operation Manual page 35

Adjusting the horizontal screen position
Adjust the horizontal screen position of VIDEO
input (SDI, VBS).
The settings are memorized for each channel,
each format, SYNC INT/EXT.
* In this setting, the values will not be stored due
to the "POWER ON STATUS" function.
Default setting is 0.
Adjusting the vertical screen position
Adjust the vertical screen position of VIDEO
input (SDI, VBS, COMPONENT).
The settings are memorized for each channel,
each format, SYNC INT/EXT.
Default setting is 0.
Setting the contrast range
NORMAL Set the video level within the range
with no over-flow even if the con-
trast level is MAX.
WIDE The contrast level can be increased
to two times.
*The high level video has the
over-flow.
Default setting is NORMAL.
- - 25