Table of Contents
Advertisement
2-3 Rear panel (video inputs/outputs)
SDI A/B signal input
Input the 3G/HD-SDI or SD-SDI (4:2:2) signal
here.
The format of input signal is automatically-
identified.
SDI signal output
Output the same selected channel signal from
the A/B channel as channel select is made for
monitoring.
NTSC/PAL-B analog composite input
Input the NTSC/PAL-B analog composite
(VBS) signal here.
Without the loop through connection in place,
connect a terminating plug.
PARALLEL REMOTE signal input
Connect the accompanying remote connectorhere.
Use a shield wire for the cable.
RS-485 input/output
You can remote control from the optional serial
remote controller "SRC-400".
Up to 32 units can be loop-through-connected.
Without loop-through connection, use the optional
terminating device.
* Make sure the cable used is shielded.
Analog audio input
Feed analog audio signals here.
- 7 -
Advertisement
Table of Contents
