Description Of Menu 1 Functions; Description Of Menu 2 Functions - Ikegami HTM-1990R Operation Manual

(3) Description of MENU 1 Functions

* Note the following description on the menu.
The vertical deflection frequency "/60" includes both 60 Hz and 59.94 Hz.
The vertical deflection frequency "/48" shows 24 sF (23.98 sF).
480i/59.94 and 575i/50 are displayed as "525I/60" and "625I/50", respectively.
MENU1 <FORMAT>→ 1080I/60
1.MULTI SDI FM AUTO
2.RGB/YPbPr FM HDTV
3. →1035/1080I 1080I/60
4. →RGB/YPbPr YPbPr
5.TEST SIG. FM 525I/60
6.INPUT DISP. ON
7.COLOR POINT P22 (EBU)
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
① Format display of selected signal
Shows the format of the currently selected signal.
② Format setting of SDI input
When the module (Ex: DKH-501) dedicated to HD-
SDI input is mounted, set the format to any of
1035i/60 , 1080i/60 , 720p/60 .
When the HD-SDI input is selected, the monitor
will be set up using the format set here.
The multi-format SDI module, if mounted, triggers
[AUTO] display and the auto detection by FORMAT.
The format setting described here is not necessary.
③ Format setting of RGB/YPbPr input
Set the RGB/YPbPr input format to SDTV or HDTV.
If set to SDTV, the format 480i/59.94 or 575i/50
is automatically detected, and the monitor is set up.
If set to HDTV, the format 1080i(1035i), 720p/60 is
automatically detected, and the monitor is set up.
If the input signal is 1035i/60 or 1080i/60 , the
format should be set individually in the following step.
Default setting is HDTV.
④ Format setting of 1035i/60 and 1080i/60 of
RGB/YPbPr input
Set the scan line number to 1035i or 1080i.
Default setting is 1080i/60.
⑤ Setting of RGB and YPbPr of RGB/YPbPr input
Set the RGB/YPbPr input signal to RGB or YPbPr.
Default setting is YPbPr.

(4) Description of MENU 2 Functions

MENU2 <MODE> VER ： 01.8
1.CENT.MARKER ON
2.MARKER COLOR ■
3.SHADOW LEVEL 40%
4.CHANGE ASPE. AUTO
5.SET UP OFF
6.REMOTE NO. 01
7.DEGAUSS TM. 1
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
① Program version display
Displays the software program version.
① Format display of selected signal
② Format setting of SDI input
③ Format setting of RGB/YPbPr input
④ Format setting of 1035i/60 and 1080i/60 of RGB/YPbPr input
⑤ Setting of RGB and YPbPr of RGB/YPbPr input
⑥ Format setting of internal TEST signal
⑦ Channel format display ON/OFF setting
⑧ Setting the color point
⑥ Format setting of internal TEST signal
⑦ Channel format display ON/OFF setting
⑧ Setting of color point
① Program version display
② Setting of MARKER center cross
③ Setting of MARKER color
④ Setting of SHADOW LEVEL
⑤ Setting of CHANGE ASPECT
⑥ Setting of remote controller
⑦ Setting of remote ID numbers
⑧ Setting of degauss ON timer
34
Set the internal TEST signal of the monitor.
The following five formats are provided as standard.
480i/59.94 ("525I/60" on the menu)
575i/50 ("625I/50" on the menu)
480p/59.94 (When supported by the monitor)
1035i/60
1080i/60
1080i/50
1080pi/24sF (When supported by the monitor)
720p/60
720p/50 (When supported by the monitor)
Default setting is 1080i/60.
Set whether to show the input and the signal
format when the channel is switched.
Controls the video signal so that the color of P22
(EBU) phosphor of the monitor's CRT comes close
to that of SMPTE phosphor.
The video signal is re-matrixed. Make the P22
(EBU) setting for adjusting the color balance and
other factors.
Default setting is P22 (EBU).