Table of Contents
Advertisement
Optional front bezel
Front bezel details
An optional metal bezel is mounted on the front of the system to display system branding. A lock on the bezel is used to protect
unauthorized access to the drives. There are two versions of bezel available:
•
With LCD panel
•
Without LCD panel
For bezels with LCD panel, the system status can be viewed on the LCD panel. For more information, see the
The LCD bezel is hot pluggable and can be used in any server of the same branding even if that system was originally not ordered with
that LCD bezel.
Removing the front bezel
The procedure to remove the front bezel with and without the LCD panel is the same.
Prerequisites
Follow the safety guidelines listed in
Steps
1. Unlock the bezel by using the bezel key.
2. Press the release button, and pull the left end of the bezel.
3. Unhook the right end, and remove the bezel.
Figure 24. Removing the optional front bezel with the LCD panel
Next steps
Install the front
bezel.
Safety
instructions.
Installing and removing system components
LCD panel
section.
73
Advertisement
Table of Contents
