Parameters: Drive Information - Danfoss FC 300 Programming Manual

FC 300 Programming Guide
14-74 VLT Ext. Status Word
Range:
*
0

2.16. Parameters: Drive Information

2.16.1. 15-** Drive Information
Parameter group containing frequency converter information such as operating data, hardware
configuration and software versions.
2.16.2. 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
15-00 Operating Hours
Range:
*
0h
15-01 Running Hours
Range:
*
0h
15-02 kWh Counter
Range:
0kWh
15-03 Power Up's
Range:
*
0
15-04 Over Temp's
Range:
*
0
Function:
[0 - 4294967295] Read out the ext. status word corresponding to VLT 3000 or VLT
5000
Function:
[0 - 2147483647 h] View how many hours the frequency converter has run. The
value is saved when the frequency converter is turned off.
Function:
[0 - 2147483647 h] View how many hours the motor has run. Reset the counter in
par. 15-07. The value is saved when the frequency converter is
turned off.
Function:
* [0 - 2147483647 Registering the power consumption of the motor as a mean val-
kWh] ue over one hour. Reset the counter in par. 15-06.
Function:
[0 - 2147483647] View the number of times the frequency converter has been
powered up.
Function:
[0 - 65535] View the number of frequency converter temperature faults
which have occurred.
®
MG.33.M2.02 - VLT is a registered Danfoss trademark
2. How to Programme
181
2